ADMIN
The Admin screen allows you to change the password, reboot the Bridge, or
reset all settings to their factory defaults. If you have changed any settings, it is
necessary to reboot the Bridge for the new settings to take effect (click the
Reboot button). Any changes in these three settings: password, device name,
and enabling uploads, however, are effective immediately.
•
Change password - Set or change the network password required to access
the utility. The default password is admin.
•
Reboot WET11 - After you have made changes through any of the screens,
click this button to enable the new settings.
•
Reset to factory defaults - Resets all configuration settings to their default
values.
Note: You may have to refresh this page to see any new settings.
26
Instant Wireless
Figure 6-6
Series
Wireless Ethernet Bridge
TM
HELP
The HELP screen offers additional explanations about the terms used on each
screen of the Utility, plus contact information for additional assistance.
Figure 6-7
27