Ff6 1 01: Trs Class: Originator Settings (Ars/Trs); Table 6-4. Trs Class: Ars/Trs Levels: Ff6 1 01 (01-50) (0001 Thru 0003) Hold - Panasonic DBS-576 Technical Manual

FF6: TRS/ARS
Introduction

FF6 1 01: TRS Class: Originator Settings (ARS/TRS)

Table 6-4. TRS Class: ARS/TRS Levels: FF6 1 01 (01-50) (0001 thru 0003) Hold

0
System
Configuration
TRS Class: ARS/TRS Levels: FF6 1 01 .......
FF1
System
FF2
Trunks
FF3
Extensions
TRS Level for Originator (ARS/TRS)
(all CPCs) - Version 1.0 or higher
(for ARS/TRS only) Assign a TRS Level to each originator (via their assigned TRS Class).
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
Notes:
FF7
This address applies only when ARS/TRS is used. It does not apply when TRS alone is used.
Applications
The TRS Level you assign to the originator (above address) will be compared to the TRS Level assigned
(in FF6 0) to the dialed digit string. The call will be allowed only if the originator's TRS Level is
higher than the dialed digit string's TRS Level.
FF8
The "originator" is the extension or DISA trunk attempting an outbound call (the system has not yet
Maintenance
seized the trunk).
TRS Level 0 (when assigned to the originator) blocks all calls. TRS Level 9 (when assigned to the
originator) allows all calls.
See figure (previous page) for illustration.
Appendix A
Appendix B
Page 6-18
(01-50) 0001
TRS Class No. TRS Level
01 0-9
02 0-9
... 0-9
50 0-9
FF6 1 01 (01-50)
TRS Class No. 1-50
assigned to the originator
of an outbound call
(extension, DISA trunk, etc.)
DBS 576 (USA) issued 05/20/98
0002
ARS Level
0-9
0-9
0-9
0-9
0001 Hold (0-9) Hold
TRS Level 0-9:
0=Restrict all outbound calls.
1-8=Restrict dialing according to
TRS settings in FF6.
9=Allow all calls. (default)
Section 400-Programming
0003
Trunk Queuing?
0=No 1=Yes
0=No 1=Yes
0=No 1=Yes
0=No 1=Yes
&
5  % 5&
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B