Message Waiting Notification - Panasonic KX-TVS75 Subscriber's Manual

4.8 Message Waiting Notification

Subscriber's
Main Command Menu
1 2 3
1
Interview
M.B.
Management
1
Message
Waiting
Lamp
Status
Message Waiting Lamp Notification Setting
- The VPS illuminates the message waiting lamp of your extension
when a new message is recorded in your mailbox.
Setting Device Status
- For each device, the notification can be enabled, disabled,
or enabled to a preset schedule. Setting notification to a preset schedule can only be
established by the System Administrator.
Notification Number Assignment
- You can set up to 3 telephone or
beeper numbers to ring when you wish to receive notification calls.
1.
Log in to your mailbox to access the Main Command Menu.
2.
Press [6] for Other Features.
For Interview Mailbox Management, Press [1].
To set up Message Waiting Notification, Press [2].
For External Message Delivery, Press [3].
3.
Press [2] to set Message Waiting Notification.
Special Features
4 5
6
Other
Features
3
2
Message External
Waiting
Message
Notification
Delivery
Setting
2 3
Change
Assign
Device
Tel. No.
Status
4.8 Message Waiting Notification
The VPS is able to notify you when a new
message has been recorded in your mailbox.
You can be notified (1) by message waiting
lamp on your telephone, or (2) by a call to
another telephone (e.g., your mobile phone),
or (3) by your beeper. You can assign time
frames to each of these devices.
The VPS is also able to notify your beeper
with the callback number of the party who
left the message. The telephone number
stored on the VPS for your beeper must
include the beeper display command.
Three features can be set for message
waiting notification: Message Waiting
Lamp Status, Change Device Status, and
Assign Telephone Number. These features
can be set by the System Administrator or at
a subscriber's telephone. Each device has its
own phone number that must be entered.
61