Chassis Ground Connection Installation - Cisco ASR 1002 Quick Start Manual

Figure 5 Attaching the Cable-Management Bracket to the Cisco ASR 1002 Router
Secure the cable-management bottom screw and top screw
1
to this ear hole
2 Cable-management U feature
Using the bottom rack-mount ear hole, insert the screw through cable-management bracket and into the chassis
Step 3
rack-mount bracket.
Using a Phillips screwdriver and the cable-management screw, thread and tighten the screw to the cable-management
Step 4
bracket.
Repeat Step1 through Step 4 for the other side of the Cisco ASR 1002 Router.
Step 5
This completes the procedure for installing the cable-management bracket on a Cisco ASR 1002 Router for a chassis rack-mount
configuration.

Chassis Ground Connection Installation

Before you connect power or turn on power to your router, you must provide an adequate chassis ground (earth) connection
for the Cisco ASR 1002 Router. The chassis ground lugs (two) and the respective screws (4) are provided in the accessory kit
that ships with your Cisco ASR 1002 Router.
See Figure 6 for the location of the chassis ground connector on the Cisco ASR 1002 Router.
3
AS R 10 02
mi n
sta t
ma j
pw r
2
cri t
Figure 5 shows the cable-management brackets attached to the chassis.
1
PWR STA T
CON
AUX
MGM T
LINK
MTS
CAR RIE R
BOO T
QE3
QE2
QE1
QE0
STA T
OS
SPA -4XO C3-P
1
Front rack-mount bracket
3
OS
SPA -4XO C3-P
OS
SPA -4XO C3-P
9