NEC Express5800/R120b-1 User Manual page 517

9.
A list of mass storage devices is displayed.
Select the [Adaptec Ultra320 SCSI Cards (Windows 64-bit)] and press Enter.
IMPORTANT:
the N8103-75/107 SCSI controller, press S.
The screen of Step 5 is displayed.
Go to Step 10.
10.
<If the SAS Controller N8103-104A is connected>
Press S.
IMPORTANT:
Insert the Windows Server 2003 x64 Edition OEM-Disk for
EXPRESSBUILDER into the floppy disk drive. If the floppy disk
drive has already contained Windows Server 2003 x64 Edition
OEM-Disk for EXPRESSBUILDER, you do not need to insert the
Windows Server 2003 x64 Edition OEM-Disk for
EXPRESSBUILDER.
If you have created the OEM-Disk into the Flash FDD, connect the
Flash FDD before you start the system.
The screen of Step 6 is displayed. Press Enter, and go to Step 11.
<If the SAS Controller N8103-104A is not connected>
Press Enter, and go to Step 12.
11.
A list of mass storage devices is displayed.
Select the [LSI Fusion-MPT SAS Driver (Server 2003 x64)] and press Enter.
The screen of Step 5 is displayed.
Press Enter, and go to Step 12.
Installing Windows Server 2003 x64 Editions F-9
If the following message is displayed when you use
The driver you provided seems to be newer
than the Windows default driver.
Windows already has a driver that you can use
for "Adaptec Ultra 320 SCSI Cards
(Windows64-bit)"
Unless the device manufacturer prefers that
you usethe driver on the floppy disk, you
should use the driver in Windows.