Relocating/Storing The Server - NEC Express5800/R120b-1 User Manual

7-12 Maintenance

RELOCATING/STORING THE SERVER

Follow the procedure below to relocate or store the server:
IMPORTANT:
If the server needs to be relocated/stored due to a change in the floor
layout to a great extent, contact your service representative.
Make sure to make a backup copy of your valuable data in the hard
disk drive, if any.
Make sure not to apply a shock to hard disk drives to relocated the
server if the contains any.
Observe the following instructions to use the server safely. Failure to follow
these instructions may result in death or serious personal injury. See pages
1-4 to 1-11 for details.
Do not disassemble, repair, or alter the server.
Do not remove the lithium battery.
Disconnect the power plug before working with the server.
Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages 1-4 to 1-11 for details.
Never attempt to lift the server only by two or less persons.
Do not install the server in any place other than specified.
Do not pinch your finger with mechanical component.
Do not connect/disconnect any interface cable with the power cord of the
server plugged to a power source.
Avoid installation in extreme temperature conditions.
WARNING
CAUTION