Demonstration Mode Setting - Kenwood DPX308U Quick Start Manual

"F/W UP" Upgrades the firmware.
Selecting "YES" and then pressing [VOL] knob
starts upgrading the firmware.
For how to update the firmware, access our web
site. http://www.kenwood.com/cs/ce/
5
Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
6
Exit Function setting mode
Press the [ ] button for at least 1 second.

Demonstration mode Setting

Turning the demonstration mode ON/OFF.
1
( : Factory setting)
2
3
4
Enter Function setting mode
Press the [VOL] knob.
Enter Demonstration mode setting
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "DEMO MODE".
Set the Demonstration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "ON" or "OFF".
Exit Function setting mode
Press the [ ] button for at least 1 second.
29
|
English