Honeywell T8095A/191108AJ Owner's Manual page 19

Troubleshooting (Continued)
Problem
No cooling
1
(continued).
Thermostat setting
and thermometer
reading disagree.
Check
— condenser switch position.
(Located outdoors and may
be turned OFF.)
— thermostat connections. Check
for correct terminal hookups.
Repair any frayedor broken wires.
Firmly tighten all terminal screws.
— other.
— level position of thermostat.
— area around thermostat for
drafts or radiant heat.
Action
Move to ON position.
Turn OFF power to cooling system.
Contact a qualified service technician
for assistance.
Reinstall thermostat wallplate or
subbase. Use a spirit level.
Thermostat should be about 5 ft [1.5m]
above floor on an inside wall. Contact a
qualified service technician for change
of location.
19
(Continued)
69-0639—1