Mackie SWA1501 Brochure & Specs

SWA1501
 The SWA1501 is a 15-inch high-output, active subwoof-
er system. It features a high-precision 15-inch transducer
combined with application-specifi c amplifi er technology.
The system is composed of a single, compact subwoofer
cabinet with built-in control and amplifi er electronics.
 The transducer used in the SWA1501 system features a
3-inch, inside/outside wound voice coil that offers extreme
power handling capabilities. The magnetic assembly used
features advancements in coil venting and structural cool-
ing that provide lower temperature rise and substantially
improved power compression characteristics.
 The amplifi er found in the SWA1501 cabinet is an
example of application-specifi c amplifi er design that can
be exercised when designing active speaker systems. The
system uses a proprietary high-effi ciency, high-current
amplifi er designed to provide high current levels at all
levels of operation. Having access to high current levels,
no matter what the power output, is absolutely critical
in achieving precise, total control of the woofer mass.
This control is responsible for lowering audible distor-
tion artifacts and providing aggressive attack through the
operating band pass of the system. The amplifi er, which is
mounted on a large, fi nned aluminum heat sink, is rated at
500 watts RMS continuous output.
 The SWA1501 features a sophisticated on board con-
trol system, allowing for fl exible integration with active or
passive full range or mid/high speaker systems. The input
panel accepts a line-level input signal and has LOOP OUT
connectors for signal routing to other devices. It also has
HIGH PASS out connectors for connection to active full range
speakers or amplifi ers powering passive full range speakers.
All signal routing is through XLR connectors in L+R stereo
or mono. There is a phase selection switch and a recessed
level control. The system features thermal protection for the
power supply and amplifi er and also incorporates RMS limit-
ing protection for the amplifi er stage that limits the amount
of long-term power delivered to the transducer.
 The cabinet is constructed using 18 mm thick multi-
layered birch plywood and fi nished in black splatter paint.
There is one handle on each side for effi cient loading and
transport as well as a top, female pole mount fi xture.
R E L A T E D P R O D U C T S
SRM450/SR1530/SA1521 Active Loudspeakers, SWA1801
Active Subwoofer, 1202-VLZ PRO 12-Channel Mic/Line
Mixer, 1402-VLZ PRO 14-Channel Mic/Line Mixer, 1604-VLZ
PRO and 1642-VLZ PRO 16-Channel Mic/Line Mixers.
SWA1501
Active Subwoofer System
Features
Active, high-output 15-inch subwoofer system

High-effi ciency/high-current 500 watt RMS

continuous output amplifi er
 High output 128 dB of peak SPL
 Response down to 36 Hz (–10 dB point)
 Can be used with active or passive speaker systems
 Built-in crossover network with stereo or mono high-
pass outputs
 Recessed level control, center detent rotating knob
(–15 to +5 dB)
 Recessed phase switch (0°–180°)
 3-inch, inside/outside high-temperature coil
technology
 Super compact, portable enclosure
 Small footprint allows for unobtrusive,
strategic placement
 Baltic birch wood construction, built-in pole mount
 Correctly weight-balanced enclosure
 Two comfortable side handles for easy carrying and
set up
Applications
Live Sound/Music Reinforcement

High-Level AV Playback

Small to Medium-Sized Portable PA Systems

Corporate Events

Night Clubs

Houses of Worship

1
O F 4 P A G E S