Table of Contents
Advertisement
Introduction
Product Overview
The IS4910 series of non-decode miniature area imaging engines is designed for integration into customer
OEM devices. When integrated with a host processor and decoding software from Omniplanar
can be used to capture images for decoding 1D and 2D bar codes in addition to OCR fonts.
The compact engine has several models available to accommodate all types of mounting requirements. All
model types provide two blind holes for self-tapping screws along with a keying location point. The IS4910-01
model provides two additional through holes located on tabs extended from the sides of the engine's chassis
and the IS4910-02 provides threaded inserts instead of through holes on the extended tabs.
The engine's physical design and low power requirements support integration into portable data terminals,
hand-held bar code scanners, ID verification devices, kiosks, portable-shopping systems, mass-storage
devices, lottery terminals, and medical/diagnostic devices.
A high-density version, IS4911 is also available.
Additional key features include:
•
Designed to scan 1D bar codes as dense as 4 mil (0.102 mm) and 2D bar codes as dense as 10 mil
(0.254 mm; Matrix codes)
•
High resolution (1280 × 960 pixels)
•
The ability to switch between Snapshot and Video modes for different applications
•
Capture and transmit high-quality black and white images
•
®
FirstFlash
circuitry which automatically adjusts to environmental illumination for excellent light immunity
•
Built-in aiming for easy scanning
•
Standby mode for power conservation
•
Low mass (< 6 g)
•
Industrial standard output for seamless integration, Molex
P/N 55560-0227
•
A choice of mounting options
®
0.50 mm (.020") Pitch SlimStack™ Plug,
®
, the engine
1
Advertisement
Table of Contents
