Electrical Specifications - Honeywell IS4910 Integration Manual

Electrical Specifications

Signal
Vimager Power to Imager and Supporting Circuitry
VLED Power to Illumination and Targeting LEDs
VIL1 Input Low (Aimer, Illum_On, Trigger)
VIH1 Input High (Aimer, Illum_On, Trigger)
VOH2 Output High Voltage (Data, PCLK, VSYNC, HSYNC)
VOL2 Output Low Voltage (Data, PCLK, VSYNC, HSYNC)
1
Sink / Source current = 2mA
2
Voltages listed are at the engine. A voltage drop should be expected when using a flex cable.
Stand By Current (V_imager = 3.3V)
Idle Current (V_camera = 3.3V)
Operating Current (V_camera = 3.3V)
idle (VLED = 5V or 3.3V)
Peak Current (VLED = 5V or 3.3V) Note: Peak duration of less than 20µS
LED enabled (VLED = 5V)
LED enabled (VLED = 3.3V)
Targeting LED
See page 11 for information on system considerations.
Signal Levels
Description
V_Imager Current (Vimager = 3.3V)
Description
VLED Current
Description
Min. Typical
3.1V 3.3V
3V -
2.1V
2.71
450 µA
55 mA
90 mA
50 µA
350 mA
90 mA
155 mA
24 mA
Max.
3.5V
5.5V
.6V
Vimager
.3V1
Typical
Typical
19