Assembly - Honda BC100 Operator's Manual

ASSEMBLY
19. Install the rubber strap on the washer at the
center of the cover frame rod. The open end
of the hook must face the cart bed. Secure
the upper hook to the frame rod by closing
the hook loop with pliers. To hold the cover
closed, hook the lower end to the cart bed
as shown.
20. Install the HTA/Honda Power Equipment
decal on the left side of the cart.
CRIMP HOOK TO FASTEN
STRAP TO COVER
Continue Installation
To finish installing the bagger cart, follow the Installation Instructions supplied with the appropriate MKC-
series kit (and side blower for 48-inch decks) for your tractor.
BClOOO BAGGER CART
23