Assembly - Honda BC100 Operator's Manual

ASSEMBLY
6. Turn the cart bed right side up. Install the latch
handle, using a 5/16 x 1-l/4-inch hex bolt, two
5/l 6 inch friction washers, two 5/l 6 inch flat
washers, and a 5/l 6 inch self-locking nut (nylon
insert).
When installing the hardware, position the friction
washers with the cupped side toward the latch
handle. Torque the self-locking nut enough so the
latch handle will turn easily, but not .move when
released.
7. Install the lift handles using four l/4 x l/2-inch
pan-head screws, four 1/4&ch lock washers, and
four l/4 inch nuts. Torque the lock nuts to 7 ft-lb
(1.0 kg-m, 10 Nom).
8. Install the support tube, using four 5/l 6 x 1 -l/2-inch
hex bolts, four 5/l 6-inch flat washers, two 5/l 6-inch
plastic spacers, and four 5/l 6-inch lock nuts. Be
sure the plastic spacers are installed on the top
bolts only. Torque the lock nuts to 14 ft-lb (1.9 kg-m,
19 Nom).
5/l 6"
FLAT
WASI
5116 x l-114" HEX BOLT
N 5118" FLAT WASHER
-
LATCH HANDLE
5/16" FRICTION WASHER
\
5116" SELF-LOCKING NUT
114 x l/2" PAN
LIFT HANDLE (2
CK WASHER (4)
\ 114" HEX NUT (4)
PLASTIC
$PACER (2)
5116; l-112"
5/l 6" FLAT
HEX BOLT (4)
w WASHER (4)
18
BClOOO BAGGER CART