SET-UP INSTRUCTIONS
SET-UP INSTRUCTIONS
R
'DRAULIC VALVE PACKAGE
LABEL
\
ORIFIt
\
1. Install the single lever control on the
hydraulic
valve assembly
following
instructions included with valve.
2. Ensure the orifice plate is installed in the
hydraulic valve as illustrated;
3. Position the hydraulicvalve assembly onto
the valve stand and secure using two l/4"
-20 hex nuts.
4. Install the valve stand on the right side of
the loader sub frame. Secure with two
5/16"
-18 X 1" capscrews,
5/16"
.lockwashers, and 5/l 6" -18 hex nuts.
19