Service - Honda FL6555 Operator's Manual

SERVICE
Locknut
Body Assembly
Rod Packing Set
\
:king Guide
Bushing Insert
SERVICE Cylinder Disassembly
General
Lift and Bucket Cylinder
Refer to illustration for component
identification.
Drain all oil from cylinder end cap (turn
counterclockwise).
Lift and bucket cylinder ports should be
capped at all times when hydraulic hoses are
Install a plug in base end port of cylinders and
disconnected to prevent contamination.
pop out rod packing set by applying air
pressure to the' rod end port of cylinders.
It is recommended that all cylinder packings
be replaced during cylinder assembly. Order
Do not apply air pressure to base end port of
seal repair kit to obtain all sealing
cylinder. As rod may extend causing injury.
components that should be replaced during Safety glasses should be worn when
hydraulic cylinder overhaul.
performing this operation.
37