Removing The Cover Assembly To Haul Other Loads - Honda BC4050 Operator's Manual

OPERATION

Removing the Cover Assembly to Haul Other Loads

I f the cart will not be used for bagging grass, you
can easily remove the cover and dump cloth to use
the cart for hauling other loads. No tools are
needed.
Unhook and remove the middle chute (see
1.
page 13).
Unhook the rubber strap from the rear of the
2.
cart, and open the cover.
Pull out the strap that attaches the cover to
3 .
o f
the top the support tube.
4. Unhook the elastic loops from the bolts at the
front corners of the frame bed.
Remove the circle clips and washers from the
5.
ends of the frame rod.
Pull the frame rod out of the support tube, and
remove the cover assembly.
Put the washers and circle clips on the frame
rod again, after removing the cover assembly.
This will help to prevent losing the hardware.
Remove the circle clips from the dump cloth
6.
rod, then remove the rod from the frame bed,
and remove the dump cloth assembly.
Put the circle clips on the rod again, after
removing the dump cloth, to prevent loss.
Installing the
Cover Assembly
Install the dump cloth and cover assembly in
the reverse order of removal.
Page
14
DUMP CLOTH
SUPPORT TUBE
I