Cisco SOHO Series Quick Reference Manual page 87

Analog Voice Interface Cards Series Features Overview
Product
VIC-2E/M
2-port E&M voice
interface card
ISDN BRI Voice Interface Cards
Product
VIC-2BRI-NT/TE
2-port BRI ISDN voice
interface card terminal
side or network side
VIC-2BRI-S/T-TE
2-port BRI ISDN voice
interface card
Interface Cards for Cisco 1700, 2600XM, 3600, and 3700 Series
Description
The two-port E&M voice
interface card for Cisco
voice/fax network modules
is used to connect to PBX
or key system trunk lines.
This voice interface card
works with existing phone
and fax equipment to
provide voice and fax
services over IP , and is
compatible with H.323
standard for audio- and
videoconferencing.
Modular Router Solutions
Voice and Fax Integration
Description
This two-port ISDN Terminal
Side or Network Side Basic
Rate Interface (BRI) voice
interface card (VIC) connects
directly to PSTNs and
PBX/PABXs and supports
both on-premise and off-
premise connections. The
VIC-2BRI-NT/TE supports a
total of four voice channels
in a single interface card via
two RJ-45 physical ports,
and enables toll-bypass and
voice over packet features.
Modular Router Solutions
Voice and Fax Integration
This two-port ISDN, S/T ,
terminal side, basic rate
interface (BRI) voice
interface card (VIC) connects
directly to PSTNs and
supports both on-premise
and off-premise
connections. The VIC-2BRI-
S/T -TE supports a total of
four voice channels in a
single interface card via two
RJ-45 physical ports, and
enables toll-bypass and
voice over packet features.
Modular Router Solutions
Voice and Fax Integration
Supported Platforms
and Minimum Cisco
IOS Versions
3700 Series – 12.2(8)T
3660 Series – 12.1(2)XH
3640 – 12.1(2)XH
3620 – 12.1(2)XH
2691 – 12.2(8)T1
2600XM Series – 12.1(14)
mainline, 12.2(12) mainline
(future), 12.2(8)T1
2650 Series – 12.1(3)T
2620 Series – 12.1(2)XH
2610 Series – 12.1(2)XH
1760 – 12.2(2)XK
[12.2(11)T–CQ3'02]
1751 – 12.2(4)T
1721 – Not Available
Supported Platforms
and Minimum Cisco
IOS Versions
3700 Series – Future
3660 Series – 12.1(3)XI
3640 – 12.1(3)XI
3620 – 12.1(3)XI
2691 – Future
2600XM Series – 12.2(12)
mainline (future), 12.2(8)T1
2650 Series – 12.1(3)XI
2620 Series – 12.1(3)XI
2610 Series – 12.1(3)XI
1760 – 12.2(2)XK
[12.2(11)T–CQ3'02]
1751 – 12.2(4)T
1721 – Not Available
3700 Series – 12.2(8)T
3660 Series – 12.0(7)XK
3640 – 12.0(3)T
3620 – 12.0(3)T
2691 – 12.2(8)T1
2600XM Series – 12.1(14)
mainline, 12.2(12) mainline
(future), 12.2(8)T1
2650 Series – 12.1(3)T
2620 Series – 12.0(3)T
2610 Series – 12.0(3)T
1760 – Not Available
1751 – Not Available
1721 – Not Available
Comments
When used in a Cisco 2600
or Cisco 3600 Series
router, requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a Cisco 1751
or Cisco 1760 Series
router, requires a DSP
module.
Requires a Cisco IOS
"Plus" feature set.
Comments
When used in a Cisco 2600
or Cisco 3600 Series
router, requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a Cisco 1751
or Cisco 1760 Series
router, requires a DSP
module.
Requires a Cisco IOS
"Plus" feature set.
When used in a Cisco 2600
or Cisco 3600 Series
router, requires a voice/fax
network module: NM-1V
or NM-2V.
Requires a Cisco IOS
"Plus" feature set.
87