Cisco SOHO Series Quick Reference Manual page 84

Interface Cards for Cisco 1700, 2600XM, 3600, and 3700 Series
T1, E1, and G.703 Multiflex Trunk Voice and WAN Interface Cards Benefits & Advantages
Product
VWIC-2MFT-G703
2-port RJ-48 multiflex
trunk-E1 framed/unframed
voice/WIC with drop
and insert
Voice Interface Cards
Analog Voice Interface Cards
Product
VIC-2FXS
2-port FXS voice
interface card
84
continued
Description
This module supports
voice, data, and integrated
voice/data applications.
For data applications, the
VWIC provides a two-port
WIC for E1/FE1 or
unframed G.703 with an
integrated DSU. For a
packet voice solution, the
VWIC provides a two-port
voice interface card (VIC)
with integrated DSU, that
combines with the digital
T1/E1 packet voice trunk
modules. For multiplexed
voice and data
applications, this module
provides a two-port VWIC
E1/FE1 drop and insert
multiplexer.
Modular Router Solutions
Serial and Legacy
Concentration
Voice and Fax Integration
Description
The two-port FXS
voice/fax interface card for
Cisco voice/fax network
modules is used to
connect directly to phones
and fax machines. This
voice interface card works
with existing phone and
fax equipment to provide
voice and fax services over
IP , and is compatible with
H.323 standard for audio-
and videoconferencing.
Modular Router Solutions
Voice and Fax Integration
Supported Platforms
and Minimum Cisco
IOS Versions
3700 Series - 12.2(8)T
3660 Series – 12.1(1)T
3640 – 12.1(1)T
3620 – 12.1(1)T
2691 – 12.2(8)T1
2600XM Series – 12.2(12)
mainline (future), 12.2(8)T1
2650 Series – 12.1(3)T
2620 Series – 12.1(1)T
2610 Series – 12.1(1)T
1760 – 12.2(4)YB
(Sixth release of 12.2T)
1751 – 12.2(4)YB
(Sixth release of 12.2T)
1721 – Future
Supported Platforms
and Minimum
IOS Versions
3700 Series - 12.2(8)T
3660 Series – 12.0(5)T
3640 – 11.3(1)T
3620 – 11.3(1)T
2691 – 12.2(8)T1
2600XM Series – 12.1(14)
mainline, 12.2(12) mainline
(future), 12.2(8)T1
2650 Series – 12.1(3)T
2620 Series – 11.3(1)T
2610 Series – 11.3(1)T
1760 – 12.2(2)XK
[12.2(11)T–CQ3'02]
1751 – 12.2(4)T
1721 – Not Available
Comments
When used in a Cisco 3600
Series router, requires one
of the following network
modules: NM-2W, NM-
1FE2W, NM-2FE2W,
NM-1FE1R2W or NM-HDV.
Minimum Cisco IOS
version may vary
depending on application.
Comments
When used in a Cisco 2600
or Cisco 3600 Series
router, requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a Cisco 1751
or Cisco 1760 Series
router, requires a DSP
module.
Requires a Cisco IOS
"Plus" feature set.