www.4GSource.net
3.7 Configuring the RFC2684 (IPoA) Mode
Configuring the RFC2684 (IPoA) mode is similar to configuring the
RFC2684 (IPoA) mode. The only difference is that you have to select
RFC2684 (IPoA) in the PVC configuration mode to configure IPoA. For
details, refer to 3.6 "Configuring the RFC2684B Mode."
3.8 Configuring the Wireless Mode
In the Wireless mode, the HG520s makes you access the Internet
without connecting a cable.
This section describes the process to configure the HG520s to
work in the Wireless mode and the process to configure your computer
to access the Internet through the HG520s.
3.8.1 Preparation
Table 3-5 shows the configuration for the Wireless mode.
Access point
Channel ID
Authentication type
802.11b/g
Table 3-5 Configuration for the Wireless mode
Name
Configuration
Enable
Select your country and district
There are three types:
OpenSystem
WEP-64Bits/WEP-128Bits
WPA-PSK/WPA2-PSK
There are three types:
802.11b
802.11g
802.11b/g
23