www.4GSource.net
of the HG520s, you need to configure parameters, for example, the
permanent virtual channel (PVC).
3.1.2 Steps
The service modes of HG520s can be realized by configuring the
corresponding working parameters.
The steps to realize a service mode are described as follows.
Step
Establish the
1
configuration
environment
Configure the
2
HG520s
Configure your
3
computer
Note:
DHCP = Dynamic Host Configuration Protocol
3.2 Service Modes of the HG520s
The HG520s supports multiple service modes and the
configuration of the DSLAM at the office end should be considered
when you select a service mode. Table 3-1 lists the service modes of
the HG520s.
To...
Refer to "2.3 Establishing Configuration
Environment."
(1) Select the PVC to be configured.
(2) Select the service mode of this PVC and
(3) Configure
(4) Save the configuration and reboot the
Configure the parameters of the network card for
the computer or install the dial-up software in the
computer according to the service mode of the
HG520s.
Do...
configure the parameters of the PVC.
functions
requirements.
For example, configure the DHCP function.
HG520s.
12
according
to
the