Table of Contents
Advertisement
www.4GSource.net
(2)
(3)
(4)
2.3 Establishing Configuration Environment
You can configure the HG520s on the Web configuration page.
This section describes the process to establish the configuration
environment of the HG520s.
2.3.1 Parameter Configuration
Before establishing the configuration environment, set the
following parameters.
Administrator username and
password of the HG520s
Connect the LINE interface of the splitter with the telephone
jack on the wall.
Connect the MODEM interface of the splitter with the ADSL
interface of the HG520s.
Connect the PHONE interface of the splitter with the
interface of the telephone line.
Connect the Ethernet interface of the HG520s with the
Ethernet interface of the computer by using Ethernet cable.
Plug the output end of the provided power adapter into the
power input interface of the HG520s; plug the other end into
the power socket.
Press the POWER button of the HG520s in the rear panel to
power on the HG520s.
Check the power indicator in the front panel of the HG520s.
If it is on, the HG520s is power on.
Table 2-1 Parameters for the configuration environment
Name
Description
Default:
Username: admin
Password: admin
8
Hide quick links:
Advertisement
Table of Contents
