Buffalo WCR-GN User Manual page 99

Appendix C TCP/IP Settings in Windows
Windows XP
To perform the settings for Windows XP, follow the procedure below.
1
Click Start > Settings > Control Panel.
2
Double click "Network".
3
Right click on "Local Area Connection", then click "Properties".
4
Select "Internet Protocol (TCP/IP)", then click "Properties".
5
Select "Obtain an IP address automatically" and "Obtain DNS server address
automatically", and then click "OK" in normal situations.
If you fix the IP address, enter the value as necessary.
ex) If the router's IP address is 192.168.11.1;
IP address
Subnet mask
Default gateway
Preferred DNS server
Alternate DNS server
6
Click "Close".
WCR-GN User Manual
192.168.11.80
255.255.255.0
blank
blank
blank
98