Buffalo WCR-GN User Manual page 46

Chapter 4 Configuration
Parameter
Wireless Radio
Wireless Channel
150Mbps Mode
Broadcast SSID
SSID1
SSID2
SSID3
SSID4
Separate feature
SSID
Authentication
WCR-GN User Manual
Meaning
Determines whether to allow wireless communication. If this is
unchecked, then no wireless connections will be allowed.
Sets a channel (a range of frequencies) used for wireless
connections. Available range of the channel is 1-11.
With Auto Channel selected, the AirStation will automatically use
the best available channel.
This parameter is disabled if WDS feature is activated.
150 Mbps mode uses twice the normal frequency range, 40
MHz instead of 20 MHz. In uncongested areas this can increase
performance. To use 150 Mbps mode, set the Bandwidth to 40 MHz
and choose an Extension Channel.
Note: If using Auto Channel for the wireless channel, then the Extension
Channel is set automatically.
This parameter is disabled if WDS feature is activated.
If "Allow" is checked, then the AirStation will respond to SSID
searches from wireless devices by broadcasting its SSID. If "Allow" is
unchecked, then the AirStation ignore SSID searches from wireless
devices.
Always enabled and support all wireless security methods of the
AirStation. Security can be disabled if necessary.
SSID2 can use WPA-PSK-TKIP or WPA/WPA2-Mixed for wireless
security. Security can be disabled if necessary.
SSID3 can use WPA-PSK-AES for wireless security.
SSID4 can use WEP for wireless security.
When "Enabled", wireless devices connected to the AirStation can
communicate only with the Internet side, not with each other.
This parameter does not function if WDS is enabled.
Set SSID using 1-32 alphanumeric character (s).
Specifies an authentication method used when connecting to a
wireless device.
45