Hitachi PJ-TX100 User's Manual And Operating Manual page 47

Operating Operating
WARNING ►When the power is on, a strong light is emitted. Do not look
into the lens or vents of the projector.
Turning on the power
1. Set the power switch to the ON position.
2. Press the button STANDBY/ON (projector)
or POWER (remote control).
Displaying
1. To select an input signal, use the button INPUT (projector), or the buttons of
PC, COMPO, S-VIDEO, VIDEO, DVI (remote control).
2.
To change the aspect ratio, use the button
ASPECT (remote control).
3. To fi nely adjust the picture position, use
the lens shift dials.
4. To adjust the zoom and focus, use the
zoom knob and the focus knob.
STANDBY/ON
button
POWER
POWER
indicator
TEMP indicator
MENU button
INPUT button
Power
switch
Turning off the power
1.
Press the button STANDBY/ON (projector) or POWER (remote control). The
message "Power off?" will appear on the screen for approximately 5 seconds.
2. Press the button STANDBY/ON (projector) or POWER
(remote control) again while the message is visible.
Then the POWER indicator will stop blinking and light to
solid orange when the lamp cooling is complete.
3. Set the power switch to the OFF position.
The POWER indicator will go off.
STANDBY/ON
LAMP
TEMP
LAMP
indicator
Cursor
buttons
ENTER
MENU ENTER
button
RESET
INPUT RESET
button
(Solid orange)
(Blinking green)
Zoom knob
Focus knob
Lens cover
POWER button
OPTBLK button
)
(Optical black
ASPECT button
MENU button
CONTRAST buttons
BRIGHT buttons
DVI button
COMPO button
(Component video)
POWER
Operating
POWER
POWER POWER
(Solid green)
Lens shift dials
LIGHT button
MODE
button (Back light)
MEMORY button
POWER LIGHT
IRIS button
ENTER button
OPT BLK MODE MEMORY
Cursor buttons
ASPECT IRIS
RESET button
ENTER
COLOR buttons
MENU RESET
AUTO button
BRIGHT CONTRAST COLOR
VIDEO
DVI PC AUTO
button
COMPO S-VIDEO VIDEO
PC button
(Computer)
S-VIDEO
button
POWER
(Blinking orange)
(Solid orange)
5