How To Register Your Picture As The Myscreen - Hitachi PJ-TX100 User's Manual And Operating Manual

Multifunctional settings
SCREEN Menu (continued)
Item
MESSAGE

How to register your picture as the MyScreen

MyScreen is pointed on the SCREEN menu.
Do you capture the picture from
If the RESET
button is pressed ...
The picture freeze and the frame for capturing appears.
Move the frame to the position of the picture
which you want to use, using
and press the ENTER button to register.
It takes about 1~2 minute to register.
Just when the picture registration is completed
the registered screen and
the message of the right is displayed for a few seconds.
If the picture registration failed,
the message of the right is displayed for a few seconds.
28
Select the TURN ON or the TURN OFF using the ▲/▼ buttons. :
TURN ON TURN OFF
When the TURN ON is selected, the following message function
works.
The message of the "AUTO IN PROGRESS" for the auto
adjustment.
The message of the "NO INPUT IS DETECTED"
The message of the "SYNC IS OUT OF RANGE"
The message of the "Detecting ..."
The indication of the input signal by input change.
The indication of the aspect ratio by changing the aspect ratio.
The indication of "IRIS", "BRIGHT", "CONTRAST", "COLOR" by
adjusting them.
Press the
The MyScreen
menu appears.
the current screen?
YES: Press the ENTER button
/
Registering.
Description
button
/ / buttons,
MyScreen
Do you start capturing this picture?
RESET :NO ENTER :YES
NO: Press the RESET button
MyScreen
Move the capture area
as you want.
RESET :RETURN ENTER
My Screen
MyScreen registration is finished.
A capturing error has occurred.
Please try again.
:NEXT
45%