Operating; Selecting An Input Signal; Selecting An Aspect Ratio - Hitachi PJ-TX100 User's Manual And Operating Manual

Operating

Operating

Selecting an input signal

1.
Using the projector's button, press the INPUT
button.
Each time you press the INPUT button, the projector
switches between its input ports. Select the signal
you wish to project.
COMPONENT VIDEO
1.
Using the remote control's button, press the button
DVI, PC, COMPO, S-VIDEO or VIDEO according to
the input port to choose.
DVI button
PC button
COMPO button
S-VIDEO button
VIDEO button

Selecting an aspect ratio

1. Press the ASPECT button (remote control) to toggle between the modes for
aspect ratio.
The NORMAL mode keeps the original aspect ratio of the signal. At a HDTV
signal of 1125i or 750p, only the 16:9 mode can be selected.
At a DVI-D port's input
4:3 16:9
At a computer signal (not DVI-D port's input)
4:3 16:9
At a video signal
4:3 16:9
At no signal
4:3 16:9
At a signal
for 4:3
At a signal
for 16:9
S-VIDEO
DVI-D
COMPUTER
COMPONENT VIDEO
S-VIDEO
VIDEO
WIDE MOVIE1
NORMAL
WIDE MOVIE1
4:3
16:9
4:3 16:9
VIDEO DVI-D
MOVIE2 NORMAL
MOVIE2
MOVIE1
WIDE
MOVIE1
WIDE
Operating
MENU ENTER
INPUT RESET
COMPUTER
POWER LIGHT
OPT BLK MODE MEMORY
ASPECT IRIS
ENTER
MENU RESET
DVI PC AUTO
BRIGHT CONTRAST COLOR
COMPO S-VIDEO VIDEO
DVI PC AUTO
COMPO S-VIDEO VIDEO
POWER LIGHT
OPT BLK MODE MEMORY
ASPECT IRIS
OPT BLK MODE MEMORY
ENTER
ASPECT IRIS
MENU RESET
BRIGHT CONTRAST COLOR
DVI PC AUTO
COMPO S-VIDEO VIDEO
MOVIE2
MOVIE2
13