Wireless Home Audio
4. Click on the Exceptions tab. Make sure that
CiscoMediaPlayer is checked.
5. Highlight CiscoMediaPlayer and click the Add Port
button. Enter a name in the Name field and enter 8015
in the Port number field. Make sure that TCP is selected
and click OK.
6. Click OK to close the Exceptions window and Windows
Firewall configuration for the Cisco Media Player is
complete.
My devices are not showing up on the main menu
carousel.
Perform each of the following steps until you are able to
locate the devices on your main menu.
Go to Settings > Zones and Libraries and select
•
Rediscover.
Go to Standby mode by pressing the power button on
•
the front of the unit. Press the power button again to
exit standby mode.
If using the Docking Station for iPod (MCCI40), verify
•
that the connector is properly attached.
If using a USB device, verify that the USB connector is
•
completely connected.
Player/Wireless-N Music Extender
Troubleshooting
40