Wireless Home Audio
Playing to Multiple Rooms
You can play different songs on individual devices or link
them so that multiple devices play the same songs in
perfect synchronization in Party Mode.
Play To
The Play To tab displays the available zones with
a check mark indicating which zone is currently being
controlled. The volume level can be controlled by using
the volume slider on the Play To tab or at the top of the
Zone window.
Play To All
Enables Party Mode and plays the music or
•
other audio to all zones.
Play To Local
Sets the Play To mode back to individual
•
zone control.
Party Mode
Party Mode allows you to link up all of your Wireless
Home Audio devices to play the same music throughout
your home. To enable party mode, perform the following
steps:
1. Go to one of the Devices under the Zone window and
click on the Play To tab.
Player/Wireless-N Music Extender
Playing Your Music with the Cisco Media Software
2. Click the Play To All button. A message will appear
stating that the linking has been successful.
The volume can be controlled for each zone independently
using the volume slider next to each linked device or the
master volume level can be adjusted using the volume
slider at the top of the window.
To unlink the devices, click the Play To Local button.
20