Wireless Settings; Zones And Libraries - Cisco LINKSYS DMP100 User Manual

Wireless Home Audio
The audio from your RCA inputs will be played on the
device. If you want it to play throughout your home, be
sure you have your zones linked. The Now Playing Queue
will indicate that the Analog Line In is being played.

Wireless Settings

The Wireless Settings option allows you to modify your
wireless network settings.
Select Network
Use this option to select a wireless
network name (also known as an SSID) from the list of
available networks or enter a wireless network name
manually by selecting Enter Network Name. To enter
the name manually, use the touchscreen keyboard on the
Controller and press Enter when done.
NOTE: The wireless
case-sensitive. Capital letters can be found
immediately after the group of lowercase
letters.
Once the wireless network name has been selected, a
screen will appear asking for the wireless security mode
utilized on the network.
Open
If your network doesn't have wireless security
•
enabled, the open option should be selected.
NOTE:
It is recommended that you use wireless
security on your network to help safeguard
your personal information. Wireless security is
typically configured on your router. Refer to the
documentation included with your router for
details on enabling wireless security.
Shared If your network uses WEP security, select
•
this option and enter in WEP key number 1. Enter the
appropriate number of hexadecimal characters ("0" to
"9" and "A" to "F"). For 64-bit encryption, enter exactly
10 hexadecimal characters. For 128-bit encryption,
enter exactly 26 hexadecimal characters.
Player/Wireless-N Music Extender
network name is
Using the Controller with Your Player
WPA
Select TKIP or AES and enter the network's
•
Passphrase (also called a pre-shared key) of 8-63
characters.
WP2
Select TKIP or AES and enter the network's
•
Passphrase (also called a pre-shared key) of 8-63
characters.
Wi-Fi Protected Setup™ Discovery
connect to your router using the Wi-Fi Protected Setup™
button on your router.
Advanced This option is used for IP configuration. A
dynamic or static IP address can be selected here.
Dynamic IP
The dynamic IP option should be selected
•
if your router or network connection automatically
provides an IP address to devices on the network.
Once this option is selected, the Details screen can be
used to verify that an IP address has been obtained.
Static IP
Selecting Static IP will prompt you to enter
•
the IP address. To enter the IP address using the remote
control, remove the existing address by using the left
arrow on the 5-Way Button. Numbers can be manually
entered using the keypad or arrow up and down on the
5-Way Button to scroll through the number selections.
To move to the next digit, use the right arrow on the
5-Way Button. To enter a dot (.) or period in the IP
address, press the zero (0) button twice.
Details
This option displays the current network
connection settings including the wireless network name,
wireless security type, DHCP status, IP address, subnet
mask, gateway, and DNS information.

Zones and Libraries

Rename Zone
This option is used to rename a device
with a name that will allow you to know where it is located
in your home. This makes it much easier to select which
areas to play music to or link.
Rediscover If one of the Wireless Home Audio devices or
one of your libraries on the network is not appearing, use
this option to rescan for any devices or libraries that are
not showing up.
This option is used to
35