Table of Contents
Advertisement
ADSL2+ Gateway with VoIP
VoIP Call Duration. Displayed here is the duration of the call.
VoIP Call Packets Sent. Displayed here is the number of packets sent.
VoIP Call Packets Recv. Displayed here is the number of packets received.
VoIP Call Bytes Sent. Displayed here is the number of bytes sent.
VoIP Call Bytes Recv. Displayed here is the number of bytes received.
VoIP Call Decode Latency. Displayed here is the number of milliseconds for decoder latency.
VoIP Call Jitter. Displayed here is the number of milliseconds for receiver jitter.
VoIP Call Round Trip Delay. Displayed here is the number of milliseconds for delay.
VoIP Call Packets Lost. Displayed here is the number of packets lost.
VoIP Call Packet Error. Displayed here is the number of invalid packets received.
VoIP Call Mapped RTP Port. Displayed here is the number of the NAT mapped RTP port.
When you have finished making changes, click the Submit All Changes button to save the changes, or click the Undo All
Changes button to undo your changes.
The Voice - System Screen
This screen lets you change the password for user access to the web-based utility.
System Configuration
User Password. Enter the password for the user. (By default, there is no password.)
When you have finished making your change, click the Submit All Changes button to save the changes, or click the Undo All
Changes button to undo your change.
Figure 6-18: Setup - Voice - System
Chapter 6: Configuring the ADSL2+ Gateway
29
The Setup - Voice Tab
Advertisement
Table of Contents
