Cisco Linksys AG310 User Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Gateway
  5. Linksys AG310
  6. User manual
Cisco Linksys AG310 User Manual

Cisco Linksys AG310 User Manual

Adsl2 plus gateway with voip
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ADSL2+ Gateway
with VoIP

User Guide

AG310
Model No.

Advertisement

Table of Contents
loading

Related Manuals for Cisco Linksys AG310

Summary of Contents for Cisco Linksys AG310

  • Page 1: User Guide

    ADSL2+ Gateway with VoIP User Guide AG310 Model No.
  • Page 2 Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2007 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.

  • Page 3: Table Of Contents

    ADSL2+ Gateway with VoIP Table of Contents Chapter 1: Introduction Welcome What’s in this User Guide? Chapter 2: Planning Your Network The Gateway’s Functions IP Addresses Chapter 3: Getting to Know the ADSL Gateway Back Panel LEDs on the Front and Side Panel Chapter 4: Connecting the ADSL2+ Gateway with VoIP Overview Connecting the Gateway to a Computer...
  • Page 4 ADSL2+ Gateway with VoIP The Applications & Gaming - DMZ Tab The Applications & Gaming - QoS Tab The Applications & Gaming - ALG Tab The Administration - Management Tab The Administration - Reporting Tab The Administration - Diagnostics Tab The Administration - Backup &...
  • Page 5 ADSL2+ Gateway with VoIP List of Figures Figure 2-1: Network Figure 3-1: Back Panel Figure 3-2: Front Panel Figure 4-1: Connect the ADSL Line Figure 4-2: Connect the Voice Line Figure 4-3: Connect a Phone Figure 4-4: Connect a PC Figure 4-5: Connect the Power Figure 6-1: Login Screen Figure 6-2: Basic Setup...
  • Page 6 ADSL2+ Gateway with VoIP Figure 6-25: Advanced VPN Settings Figure 6-26: VPN Log Figure 6-27: Internet Access Figure 6-28: Internet Policy Summary Figure 6-29: List of PCs Figure 6-30: Add/Edit Service Figure 6-31: Single Port Forwarding Figure 6-32: Port Range Forwarding Figure 6-33: Port Triggering Figure 6-34: DMZ Figure 6-35: QoS...

  • Page 7: Chapter 1: Introduction Welcome

    Chapter 1: Introduction Welcome Thank you for choosing the AG310 ADSL2+ Gateway with VoIP. This Gateway will provide your computers with a high-speed Internet connection as well as access to local resources, including files and printers. lan (local area network): The computers and...

  • Page 8: What's In This User Guide

    ADSL2+ Gateway with VoIP What’s in this User Guide? This user guide covers the steps for setting up and using the ADSL Gateway. • Chapter 1: Introduction This chapter describes applications of the ADSL Gateway and this User Guide. • Chapter 2: Planning Your Network This chapter describes the basics of networking.

  • Page 9: Chapter 2: Planning Your Network

    ADSL2+ Gateway with VoIP Chapter 2: Planning Your Network The Gateway’s Functions A Gateway is a network device that connects two networks together. In this instance, the Gateway connects your Local Area Network (LAN), or the group of computers in your home or office, to the Internet.
  • Page 10 ADSL2+ Gateway with VoIP Since you use the Gateway to share your DSL Internet connection, contact your ISP to find out if they have assigned a static IP address to your account. If so, you will need that static IP address when configuring the Gateway.

  • Page 11: Chapter 3: Getting To Know The Adsl Gateway

    ADSL2+ Gateway with VoIP Chapter 3: Getting to Know the ADSL Gateway Back Panel The Gateway’s ports and Reset button are located on the back panel. Figure 3-1: Back Panel The DSL port connects to the ADSL line from your telephone wall jack. Line The Line port connects your standard telephone and converts the signal to VoIP technology.

  • Page 12: Leds On The Front And Side Panel

    ADSL2+ Gateway with VoIP LEDs on the Front and Side Panel The Gateway's LEDs, which indicate network activity, are located on the front and side panel. Figure 3-2: Front Panel POWER Green. The POWER LED lights up when the Gateway is powered on. ETHERNET (1-4) Green.

  • Page 13: Chapter 4: Connecting The Adsl2+ Gateway With Voip

    ADSL2+ Gateway with VoIP Chapter 4: Connecting the ADSL2+ Gateway with VoIP Overview The installation technician from your ISP should have left the setup information for the modem with you after installing your broadband connection. If not, you can call your ISP to request that data. After you have the setup information you need for your specific type of Internet connection, you can begin installation and setup of the Gateway.

  • Page 14: Figure 4-3: Connect A Phone

    ADSL2+ Gateway with VoIP 4. Connect an analog telephone to the Phone port on the Gateway’s back panel. 5. Connect one end of an Ethernet network cable to one of the Ethernet ports (labeled 1-4) on the back of the Gateway, and the other end to an Ethernet port on a computer.

  • Page 15: Chapter 5: Using The Interactive Voice Response Menu Overview

    ADSL2+ Gateway with VoIP Chapter 5: Using the Interactive Voice Response Menu Overview NOTE: If your ITSP sent you the Voice Gateway, then it may be pre-configured for you, and you do not need to change any settings. Refer to the instructions supplied by your service provider for more information.
  • Page 16 ADSL2+ Gateway with VoIP For example, to enter the IP address 191.168.1.105 by keypad, press these keys: 191*168*1*105. Press the # (pound) key to indicate that you have finished entering the IP address. Then press 1 to save the IP address or press the * (star) key to cancel your entry and return to the main menu.
  • Page 17 ADSL2+ Gateway with VoIP Table 1: Interactive Voice Response Menu Action Command (press these Choices Description keys on the telephone) Check Primary DNS Server IP Hear the IP address of the Address primary DNS (Domain Name Service) server. Check Internet Web Server Port Hear the port number of the Internet Web server used for the web-based utility.
  • Page 18 ADSL2+ Gateway with VoIP Table 1: Interactive Voice Response Menu Action Command (press these Choices Description keys on the telephone) Set the Mode Press 0 to select the router/ If the Voice Gateway acts as NAT mode. the router for your network, Press 1 to select the bridge/ use the router/NAT mode.

  • Page 19: Entering A Password

    ADSL2+ Gateway with VoIP Entering a Password NOTE: These bulleted instructions only apply when you are entering a password. At all other times, pressing a number only selects a number, not a letter or punctuation mark. You may be prompted to enter a password when you want to reset the Voice Gateway to its factory default settings.

  • Page 20: Chapter 6: Configuring The Adsl2+ Gateway

    ADSL2+ Gateway with VoIP Chapter 6: Configuring the ADSL2+ Gateway Overview Follow the steps in this chapter and use the Gateway’s web-based utility to configure the ADSL2+ Gateway with HAVE YOU: Enabled TCP/IP on your VoIP. This chapter will describe each web page in the Utility and each page’s key functions. The utility can be computers? Computers communicate over the accessed via your web browser through use of a computer connected to the Gateway.
  • Page 21 ADSL2+ Gateway with VoIP Security • Firewall. To disable or enable the firewall, set up filters, and block WAN requests, click this tab. vpn (virtual private network): a security • VPN. To enable or disable Virtual Private Network (VPN) passthrough, or to set up an IPSec VPN tunnel, use measure to protect data as it leaves one this screen.

  • Page 22: How To Access The Web-Based Utility

    ADSL2+ Gateway with VoIP • Reboot. If you need to do a hard or soft reboot of the Gateway, use this screen. Status • Gateway. This screen provides status information about the Gateway. • Local Network. This provides status information about the local network. Figure 6-1: Login Screen •...

  • Page 23: Figure 6-3: Rfc 1483 Bridged - Dynamic Ip

    ADSL2+ Gateway with VoIP VC Settings You will configure your Virtual Circuit (VC) settings in this section. Multiplexing. Select LLC or VC, depending on your ISP. QoS Type. Select from the drop-down menu: • UBR (Unspecific Bit Rate) for applications that are none-time sensitive, such as e-mail. •...

  • Page 24: Figure 6-4: Rfc 1483 Bridged - Static Ip

    ADSL2+ Gateway with VoIP Static IP If you are required to use a permanent (static) IP address to connect to the Internet, then select Use the following IP Address. • Internet IP Address. This is the Gateway’s IP address, when seen from the WAN, or the Internet. Your ISP will provide you with the IP Address you need to specify here.

  • Page 25: Figure 6-7: Rfc 2516 Pppoe

    ADSL2+ Gateway with VoIP • Primary DNS (Required) and Secondary DNS (Optional). Your ISP will provide you with at least one DNS (Domain Name System) Server IP Address. RFC 2516 PPPoE Some DSL-based ISPs use PPPoE (Point-to-Point Protocol over Ethernet) to establish Internet connections. If you are connected to the Internet through a DSL line, check with your ISP to see if they use PPPoE.

  • Page 26: Figure 6-9: Bridged Mode Only

    ADSL2+ Gateway with VoIP • Connect on Demand: Max Idle Time. You can configure the Gateway to disconnect the Internet NOTE: For New Zealand, connection after it has been inactive for a specified period of time (Max Idle Time). If your Internet 1.

  • Page 27: Figure 6-11: Advanced Dhcp

    ADSL2+ Gateway with VoIP • Local DHCP Server. A Dynamic Host Configuration Protocol (DHCP) server automatically assigns an IP address to each computer on your network for you. Unless you already have one, it is highly recommended that you leave the Gateway enabled as a DHCP server. You can also use the Gateway in DHCP Relay mode.

  • Page 28: The Setup - Ddns Tab

    ADSL2+ Gateway with VoIP • Time Server Address. The default value is Auto. To designate a specific NTP time server, select Manual and enter the NTP server address in the appropriate field. When finished making your changes on this tab, click the Save Settings button to save these changes, or click the Cancel Changes button to undo your changes.

  • Page 29: The Setup - Advanced Routing Tab

    ADSL2+ Gateway with VoIP The Setup - Advanced Routing Tab The Advanced Routing screen allows you to configure the NAT, dynamic routing, and static routing settings. Advanced Routing Operating Mode. In this section, you will configure the Gateway’s general routing settings. NAT.

  • Page 30: Figure 6-15: Routing Table

    ADSL2+ Gateway with VoIP Destination IP Address. The Destination IP Address is the address of the remote network or host to which you want to assign a static route. Enter the IP address of the host for which you wish to create a static route. If you are building a route to an entire network, be sure that the network portion of the IP address is set to 0.

  • Page 31: The Setup - Voice Tab

    ADSL2+ Gateway with VoIP • IEEE 802.3 Type/Length value (the value in the 13th and 14th octets of an Ethernet frame) • Presence of a specified IEEE 802.1Q virtual LAN (VLAN) ID • Packet length between specified minimum and maximum numbers of octets. •...
  • Page 32 ADSL2+ Gateway with VoIP RTP Bytes Sent. Displayed here is the number of RTP bytes sent by the Gateway. RTP Packets Recv. Displayed here is the number of RTP packets received by the Gateway. RTP Bytes Recv. Displayed here is the number of RTP bytes received by the Gateway. SIP Messages Sent.
  • Page 33 ADSL2+ Gateway with VoIP Call 1/2 FAX. Displayed here is the status of the fax pass-through mode. Call 1/2 Type. Displayed here is the direction of the call. Call 1/2 Remote Hold. This indicates whether the far end has placed the call on hold. Call 1/2 Callback.
  • Page 34 ADSL2+ Gateway with VoIP Next Registration In. Shown here is the number of seconds until the next registration. Last Called VoIP Number. VoIP stands for Voice over Internet Protocol, which is used by Internet phone calls. Displayed here is the last Internet phone number called from the landline. Last Called PSTN Number.

  • Page 35: Figure 6-18: Setup - Voice - System

    ADSL2+ Gateway with VoIP VoIP Call Duration. Displayed here is the duration of the call. VoIP Call Packets Sent. Displayed here is the number of packets sent. VoIP Call Packets Recv. Displayed here is the number of packets received. VoIP Call Bytes Sent. Displayed here is the number of bytes sent. VoIP Call Bytes Recv.

  • Page 36: Figure 6-19: Setup - Voice - User 1

    ADSL2+ Gateway with VoIP The Voice - User 1 Screen This screen lets you configure the settings for the Internet phone line. Call Forward Settings Enter the call forwarding numbers you want to use. Cfwd All Dest. Enter the number for the Call Forward All Service feature (when you want to forward all calls). Cfwd Busy Dest.
  • Page 37 ADSL2+ Gateway with VoIP Dist Ring Setting. Select whether you want to use the distinctive ring feature, yes or no. The default is yes. Message Waiting. Select whether you want to use the message waiting feature, yes or no. The default is no. Distinctive Ring Settings Ring(1-8) Caller.

  • Page 38: Figure 6-20: Setup - Voice - Pstn User

    ADSL2+ Gateway with VoIP The Voice - PSTN User Screen This screen lets you configure the settings for the LINE port service, which can be a PSTN service or a second VoIP service. PSTN-To-VoIP Selective Call Forward Settings Enter the landline caller numbers that will be forwarded to specific Internet phone numbers. Cfwd Sel(1-8) Caller.

  • Page 39: The Security - Firewall Tab

    ADSL2+ Gateway with VoIP The Security - Firewall Tab This panel shows firewall and filter settings. Use these features to enhance the security of your network. Firewall You can enable or disable the firewall, select filters to block specific Internet data types, and block anonymous Internet requests.

  • Page 40: The Security - Vpn Tab

    ADSL2+ Gateway with VoIP The Security - VPN Tab This panel shows VPN (virtual private network) settings. You can disable or enable passthrough for four kinds of VPNs. You can also set up IPSec (Internet Protocol Security) VPN tunnels for secure remote access. VPN Passthrough Virtual Private Networking (VPN) is a security measure that basically creates a secure connection between two remote locations.
  • Page 41 ADSL2+ Gateway with VoIP Tunnel Name: Click and type in this box to give the selected tunnel a name. A name is required, but is only for your reference and need not match the name used at the remote gateway or client. Local Secure Group: To give an entire local network access to the tunnel, select Subnet and enter the network address and mask.

  • Page 42: Figure 6-25: Advanced Vpn Settings

    ADSL2+ Gateway with VoIP When you select automatic key management, an Advanced Settings button appears. Click this button if there are special requirements for this IPSec tunnel. The Advanced IPSec VPN Tunnel Setup window will appear. (Help for this window can be displayed by clicking More on the right side of the VPN panel.) In this window you can set parameters for IKE phases 1 and 2, and other settings.

  • Page 43: The Access Restriction - Internet Access Tab

    ADSL2+ Gateway with VoIP The Access Restriction - Internet Access Tab The Internet Access tab allows you to block or allow specific kinds of Internet usage. You can set up Internet access policies for specific computers and block websites by URL address or keyword. Internet Access Policy.

  • Page 44: Figure 6-29: List Of Pcs

    ADSL2+ Gateway with VoIP Then enter the range of ports you want to filter. If the service you want to block is not listed or you want to edit a service’s settings, then click the Add/Edit Service button. Then the Port Services screen will appear. To add a service, enter the service’s name in the Service Name field.

  • Page 45: The Applications & Gaming - Single Port Forwarding Tab

    ADSL2+ Gateway with VoIP The Applications & Gaming - Single Port Forwarding Tab Single Port Forwarding Use the Single Port Forwarding screen when you want to open a specific port so users on the Internet can see the servers behind the Gateway (such servers may include FTP or e-mail servers). When users send this type of request to your network via the Internet, the Gateway will forward those requests to the appropriate computer.

  • Page 46: The Applications & Gaming - Port Range Forwarding Tab

    ADSL2+ Gateway with VoIP The Applications & Gaming - Port Range Forwarding Tab The Port Range Forwarding screen sets up public services on your network, such as web servers, ftp servers, e-mail servers, or other specialized Internet applications. (Specialized Internet applications are any applications that use Internet access to perform functions such as videoconferencing or online gaming.

  • Page 47: The Applications & Gaming - Dmz Tab

    ADSL2+ Gateway with VoIP The Applications & Gaming - DMZ Tab The DMZ screen allows one local user to be exposed to the Internet for use of a special-purpose service such as Internet gaming and videoconferencing through DMZ Hosting. DMZ hosting forwards all the ports for one computer at the same time, which differs from Port Range Forwarding, which can only forward a maximum of 10 ranges of ports.

  • Page 48: Figure 6-36: Edit List Of Qos Settings

    ADSL2+ Gateway with VoIP This window lets you set the priority for packets selected by any of the following criteria, alone or in combination: • Destination. IP address and Netmask (address mask), FQDN (Fully Qualified Domain Name). • Source. IP address and Netmask (address mask). •...

  • Page 49: The Applications & Gaming - Alg Tab

    ADSL2+ Gateway with VoIP The Applications & Gaming - ALG Tab Some protocols and applications require special handling of the IP payload to make them work with network address translation (NAT). Each Application-Level Gateway (ALG) provides special handling for a specific protocol or application.

  • Page 50: The Administration - Management Tab

    ADSL2+ Gateway with VoIP The Administration - Management Tab The Management screen allows you to change the Gateway’s access settings as well as configure the SNMP (Simple Network Management Protocol), UPnP (Universal Plug and Play), IGMP (Internet Group Multicast Protocol)-Proxy, and WLAN management features. Gateway Access Local Gateway Access.

  • Page 51: Figure 6-39: Allowed Ip - Ip Range

    ADSL2+ Gateway with VoIP Use https. This checkbox enables HTTPS (HyperText Transport Protocol Secure) - An extension to the standard HTTP protocol that provides confidentiality by encrypting the traffic from the website. By default this protocol uses TCP port 443. Remote Upgrade Remote Upgrade.
  • Page 52 ADSL2+ Gateway with VoIP UPnP UPnP allows Windows Me and XP to automatically configure the Gateway for various Internet applications, such as gaming and videoconferencing. UPnP. To enable UPnP, click Enable. Otherwise, click Disable. Please select a PVC connection to bind. Select the number of the PVC over which the applications requiring UPnP will run.

  • Page 53: The Administration - Reporting Tab

    ADSL2+ Gateway with VoIP The Administration - Reporting Tab The Reporting screen provides you with a log of all incoming and outgoing URLs or IP addresses for your Internet connection. It also provides logs for VPN and firewall events. Reporting Log.

  • Page 54: The Administration - Diagnostics Tab

    ADSL2+ Gateway with VoIP The Administration - Diagnostics Tab Ping Test Ping Test Parameters Ping Target IP. Enter the IP address that you want to ping. This can be either a local (LAN) IP or an Internet (WAN) IP address. Ping Size.

  • Page 55: The Administration - Factory Defaults Tab

    ADSL2+ Gateway with VoIP The Administration - Factory Defaults Tab Factory Defaults Restore Factory Defaults. If you wish to restore the Gateway to its factory default settings and lose all your settings, click Yes. To begin the restore process, click the Save Settings button to save these changes, or click the Cancel Figure 6-44: Factory Defaults Changes button to undo your changes.

  • Page 56: The Administration - Reboot Tab

    ADSL2+ Gateway with VoIP The Administration - Reboot Tab This screen allows you to do a soft or hard reboot of the Gateway. In most cases you should use the hard reboot. The soft reboot is similar to restarting your computer without physically powering down the computer. Reboot Reboot Mode.

  • Page 57: The Status - Dsl Connection Tab

    ADSL2+ Gateway with VoIP server. (This data is stored in temporary memory and changes periodically.) Click the Refresh button if you want to refresh the displayed information. To delete a client from the DHCP server, select the client, and then click the Delete button.

  • Page 58: Appendix A: Troubleshooting

    ADSL2+ Gateway with VoIP Appendix A: Troubleshooting This appendix consists of two parts: “Common Problems and Solutions” and “Frequently Asked Questions.” Provided are possible solutions to problems that may occur during the installation and operation of the Gateway. Read the descriptions below to help you solve your problems. If you can’t find an answer here, check the Linksys international website at www.linksys.com/international.
  • Page 59 ADSL2+ Gateway with VoIP For Windows 2000: A. Click Start, Settings, and Control Panel. Double-click Network and Dial-Up Connections. B. Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and select the Properties option. C.
  • Page 60 ADSL2+ Gateway with VoIP 3. I want to test my Internet connection. A. Check your TCP/IP settings. For Windows 2000: 1. Click Start, Settings, and Control Panel. Double-click Network and Dial-Up Connections. 2. Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and select the Properties option.
  • Page 61 ADSL2+ Gateway with VoIP • If you do NOT get a reply, check the cable, and make sure Obtain an IP address automatically is selected in the TCP/IP settings for your Ethernet adapter. D. In the command prompt, type ping followed by your Internet IP address and press the Enter key. The Internet IP Address can be found in the web interface of the Gateway.
  • Page 62 ADSL2+ Gateway with VoIP C. Set a static IP address on your system; refer to “Problem #3: I need to set a static IP address on a PC.” D. Refer to “Problem #10: I am a PPPoE user, and I need to remove the proxy settings or the dial-up pop-up window.”...
  • Page 63 ADSL2+ Gateway with VoIP 7. I need to set up online game hosting or use other Internet applications. If you want to play online games or use Internet applications, most will work without port forwarding or DMZ hosting. There may be cases when you want to host an online game or Internet application. This would require you to set up the Gateway to deliver incoming packets or data to a specific computer.
  • Page 64 ADSL2+ Gateway with VoIP 8. I can’t get the Internet game, server, or application to work. If you are having difficulties getting any Internet game, server, or application to function properly, consider exposing one PC to the Internet using DeMilitarized Zone (DMZ) hosting. This option is available when an application requires too many ports or when you are not sure which port services to use.
  • Page 65 ADSL2+ Gateway with VoIP 10. When I enter a URL or IP address, I get a time-out error or am prompted to retry. Go through this checklist until your problem is solved: • Check if other PCs work. If they do, ensure that your workstation’s IP settings are correct (IP Address, Subnet Mask, Default Gateway, and DNS).
  • Page 66 ADSL2+ Gateway with VoIP D. To upgrade the firmware, follow the steps in the Administration section found in “Chapter 6: Configuring the ADSL2+ Gateway”. 14. The firmware upgrade failed, and/or the Power LED is flashing. The upgrade could have failed for a number of reasons. Follow these steps to upgrade the firmware and/or make the Power LED stop flashing: •...

  • Page 67: Frequently Asked Questions

    ADSL2+ Gateway with VoIP 4. Click the Save Settings button to continue. • If your difficulties continue, change the Size to different values. Try this list of values, one value at a time, in this order, until your problem is solved: 1462 1400 1362...
  • Page 68 ADSL2+ Gateway with VoIP Does the LAN connection of the Gateway support 100Mbps Ethernet? The Gateway supports 100Mbps over the auto-sensing Fast Ethernet 10/100 switch on the LAN side of the Gateway. Does the Gateway support ICQ send file? Yes, with the following fix: click ICQ menu > preference > connections tab>, and check I am behind a firewall or proxy.
  • Page 69 ADSL2+ Gateway with VoIP How can I check whether I have static or DHCP IP Addresses? Consult your ISP to obtain this information. Can the Gateway act as my DHCP server? Yes. The Gateway has DHCP server software built-in. What is a MAC Address? The Media Access Control (MAC) address is a unique number assigned by the manufacturer to any Ethernet networking device, such as a network adapter, that allows the network to identify it at the hardware level.
  • Page 70 ADSL2+ Gateway with VoIP I am not able to get the web configuration screen for the Gateway. What can I do? You may have to remove the proxy settings on your Internet browser, e.g., Netscape Navigator or Internet Explorer. Or remove the dial-up settings on your browser. Check with your browser documentation, and make sure that your browser is set to connect directly and that any dial-up is disabled.

  • Page 71: Appendix B: Finding The Mac Address And Ip Address For Your Ethernet Adapter

    ADSL2+ Gateway with VoIP Appendix B: Finding the MAC Address and IP Address for Your Ethernet Adapter This section describes how to find the MAC address for your computer’s Ethernet adapter so you can use the MAC filtering feature of the Gateway. You can also find the IP address of your computer’s Ethernet adapter. This IP address is used for the Gateway’s filtering, forwarding, and/or DMZ features.

  • Page 72: Windows 2000 Or Xp Instructions

    ADSL2+ Gateway with VoIP Windows 2000 or XP Instructions 1. Click Start and Run. In the Open field, enter cmd. Press the Enter key or click the OK button. Note: The MAC address is also called the Physical Address. 2. At the command prompt, enter ipconfig /all. Then press the Enter key. 3.

  • Page 73: Appendix C: Upgrading Firmware

    ADSL2+ Gateway with VoIP Appendix C: Upgrading Firmware To upgrade the Gateway’s firmware: 1. Download the Gateway’s firmware upgrade file from www.linksys.com. 2. Extract the file on your computer. 3. Open the Gateway’s web-based utility and click the Administration tab. 4.

  • Page 74: Appendix D: Glossary

    ADSL2+ Gateway with VoIP Appendix D: Glossary This glossary contains some basic networking terms you may come across when using this product. For more advanced terms, see the complete Linksys glossary at http://www.linksys.com/glossary. Access Point - A device that allows wireless-equipped computers and other devices to communicate with a wired network.
  • Page 75 ADSL2+ Gateway with VoIP DMZ (Demilitarized Zone) - Removes the Router's firewall protection from one PC, allowing it to be "seen" from the Internet. DNS (Domain Name Server) - The IP address of your ISP's server, which translates the names of websites into IP addresses.
  • Page 76 ADSL2+ Gateway with VoIP IP Address - The address used to identify a computer or device on a network. IPCONFIG - A Windows 2000 and XP utility that displays the IP address for a particular networking device. IPSec (Internet Protocol Security) - A VPN protocol used to implement secure exchange of packets at the IP layer. ISP (Internet Service Provider) - A company that provides access to the Internet.
  • Page 77 ADSL2+ Gateway with VoIP RJ-45 (Registered Jack-45) - An Ethernet connector that holds up to eight wires. Roaming - The ability to take a wireless device from one access point's range to another without losing the connection. Router - A networking device that connects multiple networks together. Server - Any computer whose function in a network is to provide user access to files, printing, communications, and other services.
  • Page 78 ADSL2+ Gateway with VoIP TKIP (Temporal Key Integrity Protocol) - a wireless encryption protocol that provides dynamic encryption keys for each packet transmitted. Topology - The physical layout of a network. TX Rate - Transmission Rate. Upgrade - To replace existing software or firmware with a newer version. Upload - To transmit a file over a network.

  • Page 79: Appendix E: Specifications

    ADSL2+ Gateway with VoIP Appendix E: Specifications Model Number AG310 Standards ANSI T1.413 Issue 2, ITU G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (ADSL2), G.992.4 (ADSL2 Lite), G.992.5 (ADSL2+), G.994.1 (G.hs), G.996.1 (G.test) Ports Power, DSL, Ethernet (1-4), Phone, Line Buttons Power, Reset...
  • Page 80 ADSL2+ Gateway with VoIP Certifications FCC Part 15B Subpart B Class B, FCC Part 15C Subpart B, FCC Part 68, CE, UL, A-tick, UPnP Operating Temp. 0º~40ºC (32º~104ºF) Storage Temp. -20º~70ºC (-4º~158ºF) Operating Humidity 10~85% Non-Condensing Storage Humidity 5~90% Non-Condensing Appendix E: Specifications...

  • Page 81: Appendix F: Warranty Information

    ADSL2+ Gateway with VoIP Appendix F: Warranty Information Linksys warrants to You that, for a period of two years (the “Warranty Period”), your Linksys Product will be substantially free of defects in materials and workmanship under normal use. Your exclusive remedy and Linksys' entire liability under this warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any rebates.

  • Page 82: Appendix G: Regulatory Information

    ADSL2+ Gateway with VoIP Appendix G: Regulatory Information FCC Statement This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 83 ADSL2+ Gateway with VoIP User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys products. Consumers are required to comply with this notice for all electronic products bearing the following symbol: Appendix G: Regulatory Information...
  • Page 84 ADSL2+ Gateway with VoIP Appendix G: Regulatory Information...
  • Page 85 ADSL2+ Gateway with VoIP Appendix G: Regulatory Information...
  • Page 86 ADSL2+ Gateway with VoIP Appendix G: Regulatory Information...
  • Page 87 ADSL2+ Gateway with VoIP For more information, visit www.linksys.com. Appendix G: Regulatory Information...

  • Page 88: Appendix H: Contact Information

    ADSL2+ Gateway with VoIP Appendix H: Contact Information Internet Service Provider (ISP) For support, contact your ISP. Linksys Visit Linksys online for information on the latest products and updates to your existing products at: http://www.linksys.com/international Appendix H: Contact Information...

Table of Contents