Compact USB 2.0 10/100 Network Adapter
1. Windows will notify you that the driver has not passed Windows Logo testing. This is normal, and it has been
4. Windows will notify you that the driver has not passed Windows Logo testing. This is normal, and it has been
verified that the Adapter does work with Windows XP. Click the Continue Anyway button.
verified that the Adapter does work with Windows XP. Click the Continue Anyway button.
2. The Completing the Found New Hardware Wizard screen will appear. Click the Finish button. Then remove the
5. The Completing the Found New Hardware Wizard screen will appear. Click the Finish button. Then remove the
Driver CD from the CD-ROM drive.
Driver CD from the CD-ROM drive.
Congratulations! The installation of the Compact USB 2.0 10/100 Network Adapter is complete.
Congratulations! The installation of the Compact USB 2.0 10/100 Network Adapter is complete.
For more information about networking under Windows XP, refer to your Microsoft Windows XP
For more information about networking under Windows XP, refer to your Microsoft Windows XP
Chapter 3: Driver Installation for the Compact USB 2.0 10/100 Network Adapter
Driver Installation for Windows XP
documentation.
documentation.
Figure 3-3: Windows Logo Testing
Figure 3-4: Installation Complete
7