Figure 5-14: Security Settings - Wpa-Personal Screen; Figure 5-15: Security Settings - Wep (64-Bit) Screen - Cisco LINKSYS WVC54GC User Manual

Compact Wireless-G Internet Video Camera
13. The Mode Setting screen will appear. Select the appropriate mode for your network.
Infrastructure. Click the Infrastructure radio button if you want the Camera to communicate using an
access point or wireless router.
Ad-Hoc. Click the Ad-Hoc radio button if you want the Camera to communicate without using an access point
or wireless router. Click the Next button.
14. The Wireless Settings screen will appear, so you can change the wireless settings. Enter your wireless
network's SSID or network name. If you chose Ad-Hoc mode, select the channel at which the network
broadcasts its wireless signal.
SSID. The SSID must be identical for all devices in a wireless network. It is case-sensitive and should have 32
alphanumeric characters or fewer. (You can use any keyboard character, but do not use any spaces.)
Channel. If you set the Camera to Ad-Hoc mode, select the appropriate channel from the drop-down menu.
All devices in your wireless ad-hoc network must use the same channel in order to function correctly.
Then click the Next button.
Chapter 5: Setting up and Mounting the Compact Wireless-G Internet Video Camera
Setup Wizard

Figure 5-14: Security Settings - WPA-Personal Screen

Figure 5-15: Security Settings - WEP (64-Bit) Screen

16