Table of Contents
Advertisement
Introduction
1.
The NETGEAR Redundant Power System and Power Bank RPS4000 provides state-of-the-art,
high-performance, IEEE-compliant network solutions. This guide describes hardware installation
and basic troubleshooting for these managed switches.
The RPS can be freestanding or rack-mounted in a wiring closet or an equipment room. For
additional information, go to the NETGEAR website at http://www.netgear.com.
Front Panel and LEDs
The following figures show the front panel of the RPS4000. The front panel contains a set of
power module LEDs for each power module slot.
RPS status LEDs
Figure 1. RPS front panel
Figure 2. RPS status LEDs
APS power module slots
APS Power Module
status LEDs
RPS Power LED
4
1
Advertisement
Table of Contents
