Wireless Settings - NETGEAR MR814 Installation Manual

ISP Login Name
If your ISP requires a login name and password (possibly because you have a PPPoE account),
fill in the following:
Login name:
Password:
Service name:
Note: The login name could be called a user name or account name by your ISP.
The login name is case sensitive. You must type it exactly as given by your ISP. For
example, c_jones is a different login name than C_Jones or cjones.
Fixed (or Static) IP Address
If you have a static IP address through your ISP, fill in the following information:
Internet IP address:
Subnet mask:
Gateway IP address:
ISP DNS Server Address Information
If you were given specific Domain Name System (DNS) server addresses, fill in the following:
DNS Server IP address(es):

Wireless Settings

Wireless Network Name (called a Service Set Identifier or SSID). This can be anything up to
32 characters as long as you can use the same name with all devices in your wireless network.
The default is Wireless.
Wireless Network Name:
Security Encryption Passphrase (called Wired Equivalent Privacy or WEP). Encryption will protect
your network from evesdroppers. The Passphrase can be anything as long as you use the same one
for all devices in your wireless network. The default setting for Security Encryption is Disabled.
Security Encryption Passphrase:
6
. .
. . .
. .
.
.
(may be your full e-mail address)
(if required by your ISP)
Note: For example, a
.
valid IP address could
be 169.254.141.148.
.
. .
. .
Note: Case Sensitive
Note: Case Sensitive