Fleetsync; Selcall (Selective Calling) - Kenwood TK-2317 Instruction Manual

FleetSync is an Alphanumeric 2-way Paging Function and is a
protocol owned by Kenwood Corporation.
Note: If set up by your dealer, your transceiver may use the
MDC-200 feature in place of FleetSync. MDC-200 and FleetSync
cannot be operated simultaneously. However, they can be
programmed onto the same transceiver, for different zones.

SElCAll (SElECTIvE CAllING)

A Selcall is a voice call to a particular station or to a group of
stations.
■ Transmitting
1 Select your desired zone and channel.
2 Press the key programmed as [Selcall] or [Selcall +
Status] to enter Selcall mode.
• The last selected station ID appears on the display.
3 Press <B or C> to select the ID of the station you want
to call.
4 Press the PTT switch and begin your conversation.
• Alternatively, you can press the Side 2 key to page the
selected station, rather than making a voice call.
■ Receiving
An alert tone will sound, the transceiver will automatically
enter Selcall Mode, and the calling station's ID will appear
when a Selcall is received.
To respond to the call, press the PTT switch and speak into
the microphone.
■ Identification Codes
An ID code is a combination of a 3-digit Fleet number and
a -digit ID number. Each transceiver must have its own
Fleet and ID number.
Note: The ID range may be limited by programming.

FleetSync

7