Fleetsync: Alphanumeric 2-Way Paging Function - Kenwood Nexedge NX-320E Instruction Manual

FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION

FleetSync is an Alphanumeric 2-way Paging Function, and is a
protocol owned by JVC KENWOOD Corporation.
Note: This function is available only in analog operation.
SELCALL (SELECTIVE CALLING)
A Selcall is a voice call to a station or group of stations.
■ Transmitting (Type I Only)
1 Select your desired zone and channel.
2 Press the key programmed as [Selcall] to enter Selcall
mode.
3 Press the <B or C> key to select the station you want to
call.
• If Manual Dialing is enabled, you can directly enter the
station ID.
4 Press the PTT switch and begin your conversation.
■ Receiving
An alert tone will sound and the transceiver will enter
Selcall mode. The calling station's ID will appear when a
Selcall is received (type I only). You can respond to the
call by pressing the PTT switch and speaking into the
microphone.
■ Identifi cation Codes
An ID code is a combination of a 3-digit Fleet number and a
4-digit ID number. Each transceiver has its own ID.
• Enter a Fleet number (100 ~ 349) to make a group call.
• Enter an ID number (1000 ~ 4999) to make an individual call in
your fl eet.
• Enter a Fleet number to make a call to all units in the selected
fl eet (Fleet call).
16