Table of Contents
Advertisement
FleetSync:
FleetSync is an Alphanumeric 2-way Paging Function, and is a
protocol owned by JVC KENWOOD Corporation.
Note: This function is available only in analog operation.
S
(S
ELCALL
ELECTIVE
A Selcall is a voice call to a station or group of stations.
■ Transmitting
1 Select your desired zone and channel.
2 Press the key programmed as Selcall or Selcall +
Status to enter Selcall mode.
3 Press
•
If Manual Dialing is enabled, you can directly enter the
station ID using the DTMF keypad.
4 Press the PTT switch and begin your conversation.
■ Receiving
An alert tone will sound and the transceiver will enter
Selcall mode. The calling station's ID will appear when a
Selcall is received. You can respond to the call by pressing
the PTT switch and speaking into the microphone.
■ Identification Codes
An ID code is a combination of a 3-digit Fleet number and a
4-digit ID number. Each transceiver has its own ID.
•
Enter a Fleet number (100 ~ 349) to make a fleet call.
•
Enter an ID number (1000 ~ 4999) to make an individual call in your fleet.
•
Enter a Group ID (which is programmed in the FPU) to make a group call.
•
Enter a Fleet number followed by an ID number to make an
individual call in your desired fleet (Inter-fleet call).
•
Select "ALL" Fleet and "ALL" ID to make a call to all units
(Broadcast call).
ALPHANUMERIC 2-WAY PAGING FUNCTION
C
ALLING
/
to select the station you want to call.
)
17
Advertisement
Table of Contents
