The Remote Control - Hitachi 42EDT41A Operating Manual

MULTI PICTURE (PinP)
The Multi Picture feature is convenient when you want to watch more than one program at the same time. You can watch a TV program
while viewing other programs from any of the video inputs.
20 18 16 14 12 10 8 6 4 2
21 19 15 13 11 9 5
17 7 3 1
Use above connection to view VCR program as a sub-picture while viewing another program as main picture (ANT, AV1, AV2, AV3,
AV4, RGB1 or RGB2).
Displaying MULTI PICTURE
If the MULTI PICTURE button on the remote control is pressed, multi pictures will display. And then three types of the screen can
be selected by pressing the MULTI MODE button on the remote control. The multi picture mode will change in the following
sequence each time the MULTI MODE button is pressed.
Activating the Split mode from the TV screen
Pressing the MULTI PICTURE button one time will display 2 pictures.
• The speaker icon can be shifted left and right by pressing the A/B button; the audio will be output
from the side on which the speaker icon is located.
• The same signal input cannot be selected for both screens at the same time.
• The TV channel can be changed by pressing the

the remote control.

• The same signal input mode cannot be selected for each screens at the same time.
• Pressing the MULTI PICTURE button at the 2 picture mode will cancel the multi picture mode.
And then, pressing the MULTI PICTURE button again will display the 4 pictures.
• Refer to the table for 2 pictures mode.
2 Pictures (Split)
Input terminal ANT
Sub
NTSC-M NTSC-M
Main
ANT NTSC-M
AV1-AV4 NTSC-M
AV1, AV2 576i, 576p
480i, 480p
1080i/50
1080i/60
720p/60
RGB1 STB
RGB2 Component
Back of VCR
AUDIO OUT VIDEO OUT
VCR
2 pictures (Split)
and
AV1-AV4 AV1, AV2
576i 480i
1080i/50 1080i/60 720p/60 STB Componen
576p 480p
RECALL button
SELECT buttons
PROGRAM UP/DOWN
buttons
4 pictures 12 pictures
PROGRAM UP/DOWN buttons on
5 AV1
RGB1 RGB2
t
( : Available)
27
MULTI PICTURE
button
MULTI MODE
button
A/B button
5 AV1 V1
A B
Main Sub