D-Link DCS-5230 User Manual page 28

Section 3 - Configuration
Wizard
The setup wizards guide you through initial setup of your IP camera.
You can use the Internet Connection Setup Wizard for initial network
setup, and you can use the Motion Detection Setup Wizard to set up
motion detection and snapshots. Simply follow the instructions given
in each step of the wizard to quickly set up your camera.
Alternatively, you can manually set up your Internet connection by
clicking Manual Internet Connection Setup, and you can manually
set up motion detection options by clicking on Manual Motion
Detection Setup. You can also see these settings by clicking on their
categories on the left side (Network Setup/ Wireless Setup/ Motion
Detection/ Snapshot).
Note: If the camera is set to SXGA mode in Audio and Video, Motion
Detection and Motion Triggered Snapshots are disabled.
D-Link DCS-5230 User Manual 28