D-Link DCS-5222L User Manual
Hd power over ethernet pan/tile network camera
Hide thumbs
Also See for DCS-5222L:
- User manual (89 pages) ,
- Quick installation manual (80 pages) ,
- Quick install manual (8 pages)
Related Manuals for D-Link DCS-5222L
Summary of Contents for D-Link DCS-5222L
- Page 1 DCS-5211L HD Power over DCS-5222L HD Wireless N Ethernet Pan/Tile Network Pan/Tile Network Camera Camera...
-
Page 2: Manual Overview
Manual Overview This manual contains the following sections: Section 1 - “Product Overview” describes what is included with the DCS-5222L/DCS-5211L camera, and things to consider before installing. Section 2 - “mydlink Portal” provides detailed information on usage and configuration of your product with www.mydlink.com. -
Page 3: Manual Revisions
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change. Please refer to the www.mydlink.com website for the most current information. - Page 4 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. D-Link DCS-5222L/DCS-5211L User Manual...
-
Page 5: Industry Canada Statement
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. D-Link DCS-5222L/DCS-5211L User Manual... - Page 6 (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter (IC: 4216A-DCS5222L / Model: DCS-5222L) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated.
- Page 7 D-Link DCS-5222L/DCS-5211L User Manual...
-
Page 8: Table Of Contents
Features ..........................2 Camera ........................20 Package Contents ....................... 3 Setup ..........................21 System Requirements ......................4 Wizard ........................21 Hardware Overview DCS-5222L ..................5 Network Setup ....................... 22 Front ........................5 Wireless ........................ 24 Back ........................6 Dynamic DNS......................25 Hardware Overview DCS-5211L .................. - Page 9 Table of Contents Log ........................42 Help..........................43 Troubleshooting .......................... 45 Technical Specifications - Remote Control Unit ................46 Technical Specifications ......................48 D-Link DCS-5222L/DCS-5211L User Manual viii...
-
Page 10: Product Overview
Thank you for purchasing the DCS-5222L/DCS-5211L Network Camera. The DCS-5222L/DCS-5211L is a versatile solution for your small office or home. The DCS-5222L/DCS-5211L is a complete system with a built-in CPU and web server that transmits high quality video images for security and surveillance. DCS-5222L/DCS-5211L can be accessed remotely, and controlled from any PC/Notebook over your local network or across the Internet via a web browser. -
Page 11: Features
• Record Directly to a NAS: The DCS-5222L/DCS-5211L allows you to record directly to a local network area storage device without the use of a dedicated PC for storing recorded video. -
Page 12: Package Contents
If any of the above items are missing from your package, please contact your retailer. Note: Using a power supply with a different voltage rating than the one included with the DCS-5222L/DCS-5221L will cause damage and void the warranty for this product. -
Page 13: System Requirements
Section 1 - Product Overview System Requirements • Wired (10/100/1000 Fast Ethernet) network Network Requirements • Wireless 802.11g/n/b network (DCS-5222L only) • An Internet connection • A router connected to your broadband modem CD Setup Wizard Computer with the following: Requirements •... -
Page 14: Front
Section 1 - Product Overview Hardware Overview DCS-5222L Front Day/Night Vision LED’s Light Sensor PIR Motion Sensor Camera Lens Microphone Remote Control Receiver Wireless Antenna D-Link DCS-5222L/DCS-5211L User Manual... -
Page 15: Back
Micro SD Insert Micro SD card here. Reset Button Press and hold to reset to factory standard. Ethernet port Power jack Connects to a PC or network through Connects to the power adapter. an Ethernet connection. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 16: Front
Section 1 - Product Overview Hardware Overview DCS-5211L Front Day/Night Vision LED’s Light Sensor PIR Motion Sensor Camera Lens Microphone Remote Control Receiver D-Link DCS-5222L/DCS-5211L User Manual... -
Page 17: Back
Micro SD Insert Micro SD card here. Reset Button Press and hold to reset to factory standard. Ethernet port Power jack Connects to a PC or network through Connects to the power adapter. an Ethernet connection. D-Link DCS-5222L/DCS-5211L User Manual... - Page 18 Wireless Installation Considerations The DCS-5222L Network Camera can be connected to your network wirelessly from anywhere within its operating range. However, keep in mind that there are factors that affect the signal strength and range of your connection. The number of objects the signal must pass through, together with the number of radio frequencies in the area, will have an effect on the range of your signal.
-
Page 19: Mydlink Portal
Portal After registering your DCS-5222L camera with a mydlink account in the Camera Setup Wizard. You will be able to remotely access your camera from the www.mydlink.com website. After signing in to your mydlink account, you will see a screen similar... -
Page 20: Camera Status
• Check to make sure that the power LED on your camera is lit solid red. If you still cannot access your camera, reset your camera and run the Camera Setup Wizard again from the CD- ROM included in your package. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 21: Live Video
QVGA resolution (320x240) if viewing your camera from a PC on a remote network. Note: If your router does not support UPnP, there will be a 60 second time limit when viewing your camera remotely. Maximum only allow 3 views for video feed at a time. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 22: Camera Settings
Camera Settings The Camera Settings tab allows you to access your camera’s configuration interface. To open your camera’s configuration interface, click Camera web page and enter the password exactly as listed on the Camera Settings page. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 23: Camera Info
Model Name: This shows you the model name of your device. MAC Address: This shows you the MAC address of your device. Support: This section provides you with links to various support websites and downloads related to your product. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 24: Installation
Insert the Installation CD-ROM into your computer’s CD-ROM drive to start the autorun program. The CD-ROM will open the Camera Setup Wizard. Simply click Start to go through the Setup Wizard, which will help you through the entire installation process from connecting your hardware to configuring your camera. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 25: Hardware Installation
B) Using the provided screws; screw the mount to the wall or ceiling, with the correct tools, where the device is to be placed. C) Holding the IP camera firmly, place the IP camera in the mount and swivel until secured. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 26: Inserting A Micro Sd Card
Section 3 - Installation Inserting a Micro SD Card Insert your Micro SD card into the Micro SD card slot on the DCS-5222L/DCS-5211L. D-Link DCS-5222L/DCS-5211L User Manual... - Page 27 (*Further details and a technical specification can be found on page 51) D-Link DCS-5222L/DCS-5211L User Manual...
-
Page 28: Connect The Ethernet Cable
Connect the Ethernet Cable Connect one end of the blue Ethernet cables included in your package to the Ethernet port on the back of the DCS-5222L/DCS- 5211L camera. Connect the other end of the cable to an available LAN port on your router or broadband modem. -
Page 29: Setting Up A Wireless Connection With Wps
If your wireless access point or router supports push-button wireless protected setup (WPS), it is possible to quickly configure the wireless network and DCS-5222L camera without using the camera’s web interface. After plugging the power adapter to your camera and the front status LED lights up, hold down the WPS button next to the Micro SD card slot for 3 seconds. -
Page 30: Using The Configuration Menu
After completing the Camera Setup Wizard, you are ready to use your camera. The camera’s built-in Web configuration utility is designed to allow you to easily access and configure your DCS-5222L/DCS-5211L. At the end of the wizard, click Go To Camera, or enter the IP address of your camera into a web browser, such as Internet Explorer . -
Page 31: Web-Based Configuration Utility
Section 4 - Configuration Web-based Configuration Utility Use the following sections to set up and configure your network camera: • LIVE VIDEO • SETUP • MAINTENANCE • STATUS • HELP D-Link DCS-5222L/DCS-5211L User Manual... -
Page 32: Live Video
Click this button to quickly move the camera to the desired patrol setup according to preset positions. (Please refer to “camera Patrol: control” setup for the preset list function). The bottom of this page contains several icons which can be used to control the camera’s main functions. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 33: Setup
Manual Internet Connection Setup, and you can manually set up motion detection options by clicking on Manual Motion Detection Setup. You can also see these settings by clicking on the menu on the left panel (Network Setup / Wireless Setup / Motion Detection / Snapshot). D-Link DCS-5222L/DCS-5211L User Manual... -
Page 34: Network Setup
Bonjour: Enabling Bonjour will allow discovery of cameras by Apple computers. Note: If you need to use a static IP address and you do not know the network information, contact your Internet Service Provider (ISP) for assistance. D-Link DCS-5222L/DCS-5211L User Manual... - Page 35 Appendix A: Installing the DCS-5222L/DCS-5211L on a Router Without UPnP. For installing multiple cameras, ONE port per camera must be opened on your router, the Web server (HTTP) port. Also, some browsers may restrict some ports, such as 1 or 22, for security purposes.
-
Page 36: Wireless
Key: If you use WEP, WPA-PSK, or WPA-PSK2 authentication, enter the Key (also known as password) used for your wireless network. After making any changes, click the Save Settings button to save your changes, or click the Don’t Save Settings button to discard your changes. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 37: Dynamic Dns
IP address, is useful. With most Cable and DSL connections, you are assigned a dynamic IP address and that address is used only for the duration of that specific connection. With the DCS-5222L/DCS-5211L, you can set up your DDNS service and the DCS-5222L/DCS-5211L will automatically update your DDNS server every time it receives a different IP address. -
Page 38: Image Setup
Slow shutter: This can be used to allow manual control of the shutter speed. Select slower shutter speeds when environment is dimly lit, faster speeds are required when in brighter lighting. Note: Mirror and Flip can be used if you choose to mount the DCS-5222L/DCS-5211L upside down on the ceiling. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 39: Audio And Video
Note: Video Profile 3 is always set to MJPEG as the Encode Type to ensure that at least one of the Video Profiles are viewable by non-IE browsers. Video Profile 4 is for mobile devices only, and always uses MPEG-4 as the Encode Type. D-Link DCS-5222L/DCS-5211L User Manual... - Page 40 For best viewing results on a mobile phone, we suggest setting the frame rate to 5 fps and the bit rate to 20 Kbps. After making any changes, click the Save Settings button to save your changes, or click the Don’t Save Settings button to discard your changes. D-Link DCS-5222L/DCS-5211L User Manual...
-
Page 41: Motion Detection
No Motion Motion The motion notification will continue to blink as long as motion is detected. If no additional motion is detected, it will return to its original state after eight seconds. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 42: Time And Date
After making any changes, click the Save Settings button to save your changes, or click the Don’t Save Settings button to discard your changes. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 43: Camera Control
Section 4 - Configuration Camera Control Click the Preset Position button from the left side of the Setup screen to access settings that affect how the DCS-5222L Internet Camera can pan and move to preset locations. Pan Step Select the speed at which the camera will pan for a full cycle from the drop-down list. - Page 44 Selected Locations list by clicking Select. You can then select the order in which the camera will patrol through the preset locations by selecting a location and clicking Up or Down. Click Remove to remove a location from the list. D-Link DCS-5222L/DCS-5211L User Manual...
-
Page 45: Sd Recording
Keep Free Space: This sets the capacity of your local SD Card to prevent the system from becoming unstable. Cyclic: When this option is selected, it will cause the oldest folder to be deleted when the system requires storage space for new files. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 46: Video Clip
Pre-event recording: It is possible to specify how many seconds of video will be recorded, before the video clip is taken. Maximum duration: This specifies how many seconds of video clipping is taken. Target it is possible to select the target as FTP or E-mail for the video clipping. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 47: Snapshot
Snapshot Type: It is possible to set snapshot codec from Profile 3(JPEG), Single snapshot or 6 snapshot here. 6 snapshot: Select this option to take continuous 6 pictures for each snapshot. Target: It is possible to select the target as FTP or E-mail for the snapshot. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 48: Digital Output
Section 4 - Configuration Digital Output You can enable the digital output port as well as configure the trigger event. Motion Detection: When a motion detection is triggered. D/I Signal: A trigger from the Digital Input port. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 49: Sd Management
Refresh: Click it reload data to webpage. Top Level: Click it go back to previous level. Delete: Click this button to select all the files below. OK: Click this button to delete the selected files above. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 50: Maintenance
Privacy Mode: Select on/off or schedule the privacy mode for your camera to ensure the privacy. When the privacy mode is turned on, the camera hides the lens by rolling it back into the unit. After making any changes to this section, click the Save button to save your changes. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 51: System
Restore To Factory Defaults: Click this button to reset all settings to their factory defaults. If you choose to reset your settings, you will need to set up your camera again. Reboot Device: Clicking the Reboot button will reboot your device. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 52: Firmware Upgrade
Note: It is recommended that you use a wired connection for your computer and camera when upgrading the firmware. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 53: Status
Section 4 - Configuration Status Device Info This screen shows you various information about your camera and its current settings. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 54: Log
Section 4 - Configuration The log shows you a list of events that have happened recently. You can download the log by clicking the Download button, or you can empty the log by clicking the Clear button. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 55: Help
DCS-5222L/DCS-5211L for your reference. 1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website on the Internet or have to be connected to the Internet. - Page 56 • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your the web management.
-
Page 57: Troubleshooting
For example, if your camera’s mydlink No. was 12345678, you would be able to access your camera remotely by opening your web browser and going to http://12345678.dev.mydlink.com This URL will open your camera’s web interface, where you can sign in and configure your camera’s settings. D-Link DCS-5222L/DCS-5211L User Manual... -
Page 58: Technical Specifications - Remote Control Unit
Privacy key Pressing privacy key will tilt to privacy position where camera is hidden in cover (privacy mode). Pressing again privacy key in privacy mode will tilt back to the previous position. D-Link DCS-5222L/DCS-5211L User Manual... - Page 59 Pan move to the left (2,2) ..........................Home Return to home position (2,3) ..........................Right Pan move to the right (3,1) .......................... Calibrate Calibrate home position (3,2) ..........................Down Tilt move down (3,3) ..........................Privacy Tilt to privacy position. D-Link DCS-5222L/DCS-5211L User Manual...
- Page 60 • Monitor the status of digital input. • Drive the output switch on or off. AC/ DC Load Interface Schematic Output device (load) is driven by external AC or DC power supply. Input device (active control device) has independent power supply. D-Link DCS-5222L/DCS-5211L User Manual...
-
Page 61: Technical Specifications
Appendix A - Technical Specifications Technical Specifications System Requirements • Operating System: Windows XP/Vista/7 Wireless Connectivity (DCS-5222L only) • Browser:Internet Explore Version 7 above, Firefox 3.5 • 802.11g/n Wireless with WEP/WPA/WPA2 Security or above, Safari 4.0 or above, Chrome 8.0 above •... - Page 62 • Output: 12VDC, 1.25A • Powered by an external power adapter • Maximum power consumption DCS-5222L: 10.5W @motor on ; 8.2W @motor off DCS-5211L : 9W @motor on ; 6.1W @motor off Dimensions (WxDxH) • 114.0mm x 114.0mm x 125.0mm...