Using The Digital Zoom - Hitachi VM-H835LA Instruction Manual

Using the Digital Zoom

The power zoom W control widens the picture, moving the subject farther away, while
the power zoom T control brings the subject closer, narrowing the picture. If "ZOOM"
appears at the left of the viewfinder or LCD monitor, the digital zoom function shown
below has been engaged.
When the power zoom control is operated, the zoom position is displayed in the
viewfinder or LCD monitor for about 5 seconds and then disappears. The zoom position
is displayed in 10 steps.
Using the Digital Zoom
The digital zoom increases the magnification of the power zoom by 2 times. You must
place the subject you wish to magnify at the center of the viewfinder or LCD monitor.
Slide and hold the power zoom control to the "T" side until you find the picture you want.
You control the zoom with the power zoom T and W controls. When "ZOOM" is not
displayed in the viewfinder or LCD monitor, normal zoom functions resume.
Note: This digital zoom has certain limitation and may degradate at extreme magnification
and amplify camcorder's movement.
34