Table of Contents
Advertisement
Controlling Your TV with the Camcorder's Remote Control
Programming the Remote Control
• Turn the television on (any channel is okay).
• Aim the camcorder's remote control at your TV set. Hold down the CH ( ) button while
you press the button corresponding to your brand of television as shown in the chart
(page 51).
For example, if you have an RCA television, press CH ( ) and DISPLAY at the same
time. If this button combination sends a signal that matches your TV, the channel will
change on the TV, and you'll know the remote is set to control the television.
• If that button combination does not change the TV channel, go through the whole list
of button combinations one by one until you find one that does change your TV channel.
Also, if your brand of TV is not listed in the chart, try all the buttons. One of them may
work for you.
If the TV channel still doesn't change after going through all the button combinations
listed, it is likely that you will not be able to program this remote control for your TV.
TV Brands
Hitachi
Zenith
Sony
Magnavox
Sanyo
Gold Star 1 F.FWD
Toshiba
Gold Star 2 STOP
NEC
RCA
Panasonic
Mitsubishi
JVC
Sharp
Controlling the TV
Once programmed, the camcorder's remote control is ready to control the TV.
• Press the button of the TV function that you want.
Be aware that not all of your TV's functions may work even though the remote control is
correctly programmed.
Press CH (
) and This Button
AVX
VOL (
)
ZOOM.(W)
REW
PLAY
AV DUB
PAUSE (START/STOP)
DISPLAY
TITLE ON/OFF
ZOOM.(T)
COUNTER RESET
REVIEW
61
Hide quick links:
Advertisement
Table of Contents
