D-Link AirPro DWL-AB650 User Manual page 38

DWL-AB650 Wireless Multimode Cardbus Adapter
On the left side of the screen are Available WLANs which you may connect
to by first selecting the WLAN (it will appear highlighted) and then clicking on
Add. When you do so a screen like the one below will pop up:
In the Wireless Network Properties screen you may change the name of
the WLAN. You may also enter wireless network encryption keys by
checking Network Authentication (Shared mode) or Enable Data
encryption. You may enter up to four keys of length 10 or 25 hexadecimal
digits. You may also set one of the four keys as a default key.
Click on IP Config to set the IP address, Subnet mask, and Default gateway
manually instead of obtaining the IP address automatically through the
Dynamic Configuration Host Protocol (DCHP) server. You may also set the
DNS server address settings and WINS address settings.
If the network you are using is a computer-to-computer network or ad hoc
network, no access points are used. You may check the box "This is a
computer to computer (ad hoc) network; no access points are used" to
enable this option.
38