Playback - Hitachi VM-H100LA Instruction Manual

Basic Techniques
5. To stop recording press the Start/Stop button and REC disappears from the LCD monitor replaced by
places the camcorder in standby.
Note: TAPE END flashes on the LCD monitor when about 3 minutes or less remain of the tape cassette.
Note: If the camcorder is left in record/pause mode for than 5 minutes, the camcorder turns off automatically.
To restart it press the Start/Stop button on the camcorder and the camcorder returns to record/pause mode.

Playback

You can view recorded pictures on the 4" LCD monitor immediately after recording.
1. Hold down the red button on the CAM/OFF/VIDEO switch while sliding the switch to VIDEO.
2. Press the rewind button to the position where you want to start playback.
3. Press the play button and play back the tape.
To adjust the sound volume, press the FOCUS/VOLUME
4. Press the stop button when you have finished.
Note: The letters and symbols are displayed on the LCD monitor in color, but they are in black-and-white on
the TV screen.
Note: Decrease the sound volume of the camcorder when you play back a recording by connecting the
camcorder to your TV. If the volume of the camcorder is set to maximum, the played back picture may be
distorted.
Using Still
To view a still picture during playback press the Start/Stop or PAUSE button. Press either button again to resume
playback. If you leave the camcorder in still mode for more than 5 minutes the camcorder automatically stops to
prevent damage to the tape.
Note: When you engage still mode the still picture will have some interference or noise. This is normal.
up and down buttons.
- 24 -
. This