Loading Batteries - Hitachi VM-H100LA Instruction Manual

Getting Started

Loading Batteries

Install the remote control battery now to prevent misplacing it.
Remote Control Battery
1. Push the tab to the right of the remote control and hold it, then remove the battery holder.
2. Insert the battery with + facing up shown in figure above.
3. Replace the battery holder with battery in the remote control making sure that it is fully inserted.
WARNING: KEEP THE BATTERY AWAY FROM CHILDREN AND PETS.
IF SWALLOWED CONSULT A PHYSICIAN IMMEDIATELY FOR EMERGENCY TREATMENT.
Note: Replace the remote control battery with 3V micro lithium cells such as Maxell CR2025 or its equivalent.
Note: Dispose of battery safely in accordance with local laws. Do not dispose of in fire.
Note: Do not short circuit the battery.
Note: Do not take apart the battery.
Note: Do not hold the battery with the metallic tweezers.
Note: Do not re-charge the battery.
Note: Keep the battery in a dark, cool, dry place.
Camcorder Battery
Before you install the battery for the first time it must be charged. Refer to "Charging the Battery" on page 12 for
details.
1. Push the BATT. EJECT lever in the direction of the arrow to open the battery compartment cover.
2. Insert the battery with the correct orientation all the way until a click is heard.
3. Close the cover firmly. to close the cover, press the section marked PUSH and make sure there is a click.
- 14 -