Using Alternative Power Sources - Hitachi VM-H100LA Instruction Manual

Getting Started - 15 -
Removing the Battery
1. Push the BATT. EJECT lever to open the battery compartment cover.
2. Push the battery release lever in the direction of the arrow; the battery will come out. Pull the battery forward to
remove it.
Note: The battery is ejected by the force of a spring. Be careful not to drop the battery.
Checking the Battery's Charge
A battery charge indicator is located on the upper right corner of the LCD monitor. One of three symbols displays
when the battery is used.
This symbol indicates a fully charged battery.
This symbol indicates a partially charged battery.
This flashing symbol indicates a battery nearly out of power. Use an alternative power source or
charge the battery before continuing to use the camcorder.

Using Alternative Power Sources

Using the AC Adapter/Charger
Please ensure that the CAM/OFF/VIDEO switch is in the OFF position whenever attaching or detaching any
power supply (ie. battery, AC adapter/charger, etc.).
Before attaching the external power cord check that there is no sand, water or dirt adhering to the terminal of the
attachment section. If anything adheres to the terminal, use the brush (provided) or a soft cloth to wipe it off
completely.