Using Macro; Creating And Recording A Title (The Remote Control Is Optional For Vm-E110A) - Hitachi VM-E110A Instruction Manual

Advanced Techniques
tape. Release the button and the camcorder stops the tape at the exact position you
selected.

Using Macro

14
This function allows you to shoot subjects as close as 0.4 inches. Press and hold the power
zoom control W. The camera focuses on the subject automatically. Check your lighting as it
tends to be insufficient when filming close up.

Creating and Recording A Title (The remote control is optional for VM-E110A)

Create titles easily and personalize your recordings while keeping a permanent visual
record of what is contained on a tape. The camcorder can store a title in its memory. A
title stored in memory can be displayed and recorded at any time. A title contains two
lines of up to 16 characters per line. The camcorder contains 47 different characters for
creating a title. When creating a title, use the TITLE ON/OFF button on the remote
control. (When creating a title in the CAM mode, the DATE/TITLE button of the
camcorder can be used instead of the TITLE ON/OFF button on the remote control. "
TITLE" should be displayed in the viewfinder at this time.)
Note: Be sure to insert the date/title battery before creating a title. Although a title can be
created without the date/title battery inserted, it will disappear when the battery providing
power to the camcorder is removed.
46