AEG CS FMP200 Owner's Manual page 12

OPERATION
broadcasting for a certain time
period. When region is on, the
current listening program remains
unchanged. When region is off, it
allows the reception moves to the
regional station.
- Using PTY to Select Program
PTY button (1) is operated as
follows:
PTY MUSIC group PTY SPEECH group
While selecting PTY engagement,
its selection is implemented by
preset buttons as described in notes.
When PTY is selected, the radio
starts to search corresponding PTY
information, and stops if the
corresponding PTY information is
detected.
If corresponding PTY information is
not existed any more, PTY engaging
is automatically exit to normal mode.
Notes:
When PTY mode is engaged, the
PTY switch is shared as follows:
PTY MUSIC group PTY SPEECH group
According to above 2 allotted group,
the preset number is used for PTY
selection as follows:
MUSIC group
* POP M, ROCK M
*EASY M, LIGHT M
*CLASSICS, OTHER M
*JAZZ, COUNTRY
*NATION M, OLDIES
*FOLK M SPEECH group
*NEWS, AFFAIRS, INFO
*SPORT, EDUCATE, DRAMA
*CULTURE, SCIENCE, VARIED
*WEATHER, FINANCE, CHILDREN
*SOCIAL, RELIGION, PHONE IN
*TRAVEL, LEISURE, DOCUMENT
- Listening to Traffic Announcement
TA button (2) is operated as follows:
When pressed short, it is engaging
whether TA mode on or off.
When TA mode is on and a traffic
announcement is transmitted:
PTY off
PTY off
12
When the unit was in CD (MP3), it
will switch temporarily to radio
mode.
Temporary switch over to an EON
linked station when EON detects a
traffic announcement on that other
program.
If the volume level was under the
threshold point it will be raised to
the threshold point. But the user
changed the volume level, which
was more than the threshold point
(min. TA volume level), it will be set
to the last level.
When TA mode is on, TA of
individual segment is turned on.
When a TP station is received, TP
of individual segment is turned on.
TA interruption function
The current traffic announcement is
cancelled by pressing this key.
But the TA mode will not be off.
When pressed long, it is selected
EON TA LOCAL/EON TA
DISTANCE mode.
The purpose of this key is to reduce
unwanted EON TA switching, which
EON TA information was received
from current station and the radio
switched to that EON linked station,
but no information could not be
received because the EON linked
station is located too far from that
area. So the radio is switched back
to current station again. In above
operation, a customer listens to a
wrong program or mute sound for a
while.
EON TA LOCAL mode
When the filed strength level of
EON linked is less than threshold
level, the radio does not switch that
station, and a customer can hardly
listen to any disturbances.
When EON TA LOCAL mode is
selected, "EON TA LO" on numeric
display is indicated for a few
seconds.
EON TA DISTANCE mode
EON TA switch is tried to
implemented by the information of
current station.