Dubbing Images Recorded On A Tape To A Multimediacard - JVC GR-DVX7 Instructions Manual

PHOTO
(SNAPSHOT)
Button
Lock Button
Power Switch
Power lamp
Play/Pause (4/6)
Button
SNAPSHOT MODE Button
Display
Dubbing Images Recorded On A Tape To A
MultiMediaCard
Images can be dubbed from a tape to a MultiMediaCard.
1
2
3
4
5
NOTES:
SP
4
LOAD CASSETTE AND
MULTIMEDIACARD
SELECT OPERATION MODE
Set the Power Switch to "
down the Lock Button. Open the LCD monitor fully
or pull out the viewfinder fully.
SELECT IMAGE TO BE DUBBED
Press 4/6 to start playback. At the moment you find
the image you wish to dub, press it again to engage
Still Playback.
SELECT SNAPSHOT MODE
Press SNAPSHOT MODE to select the Snapshot
mode to use for dubbing the image to the
MultiMediaCard.
START COPYING
Press PHOTO (SNAPSHOT). The image is stored in
the MultiMediaCard.
•" " blinks during dubbing.
If PHOTO (SNAPSHOT) is pressed in step 5 when a
MultiMediaCard is not loaded, the message "COPYING
FAILED" is displayed.
If an image recorded on the tape using the WIDE mode
( pg. 37) is dubbed to a MultiMediaCard, the WIDE
mode identifying signal is not dubbed with it.
77
EN
" while pressing